topic title: antiX-M8.5-full-test1 and antiX-M8.5-base-test1 available
Posts: 4,164
rokytnji
Joined: 20 Feb 2009
#61
Never have luck with Ceni. And my Network is simple and Open.

Code: Select all

wmaster0: unknown hardware address type 801
wmaster0: unknown hardware address type 801
Listening on LPF/wlan0/00:11:50:dd:3b:c0
Sending on   LPF/wlan0/00:11:50:dd:3b:c0
Sending on   Socket/fallback
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 4
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 6
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 11
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 7
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 10
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 13
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 10
No DHCPOFFERS received.
No working leases in persistent database - sleeping.
run-parts --verbose /etc/network/if-up.d
run-parts: executing /etc/network/if-up.d/mountnfs
run-parts: executing /etc/network/if-up.d/ntpdate
run-parts: executing /etc/network/if-up.d/wpasupplicant
Posts: 4,164
rokytnji
Joined: 20 Feb 2009
#62
Same error

Code: Select all

biker:/home/harry# apt-get purge wicd
Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following packages were automatically installed and are no longer required:
  python-urwid
Use 'apt-get autoremove' to remove them.
The following packages will be REMOVED:
  wicd
0 upgraded, 0 newly installed, 1 to remove and 0 not upgraded.
1 not fully installed or removed.
After this operation, 2,585kB disk space will be freed.
Do you want to continue [Y/n]? y
(Reading database ... 63387 files and directories currently installed.)
Removing wicd ...
dpkg: error processing wicd (--remove):
 cannot remove file `/etc/wicd/encryption/templates': Not a directory
Processing triggers for man-db ...
Processing triggers for desktop-file-utils ...
Processing triggers for menu ...
Processing triggers for hicolor-icon-theme ...
Errors were encountered while processing:
 wicd
E: Sub-process /usr/bin/dpkg returned an error code (1)
biker:/home/harry#
This is after removing
wicd.config, wicd.postinst and wicd.postrm,wicd.prerm file.
I am gonna go through my steps and start over. Need to take a breath. No sweat Anti. __{{emoticon}}__
Posts: 4,164
rokytnji
Joined: 20 Feb 2009
#63
Sucess in removing wicd.

Code: Select all

# apt-get clean
biker:/home/harry# apt-get purge wicd
Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following packages were automatically installed and are no longer required:
  python-urwid
Use 'apt-get autoremove' to remove them.
The following packages will be REMOVED:
  wicd
0 upgraded, 0 newly installed, 1 to remove and 0 not upgraded.
1 not fully installed or removed.
After this operation, 2,585kB disk space will be freed.
Do you want to continue [Y/n]? y
(Reading database ... 50%
dpkg: warning: files list file for package `wicd' missing, assuming package has no files currently installed.
(Reading database ... 63178 files and directories currently installed.)
Removing wicd ...
Posts: 4,164
rokytnji
Joined: 20 Feb 2009
#64
Must be a baaaad spot in the Universe for me tonight.

Code: Select all

# apt-get update
Get:1 http://ftp.us.debian.org stable Release.gpg [1,032B]                     
Ign http://ftp.us.debian.org stable/main Translation-en_US                     
Ign http://ftp.us.debian.org stable/contrib Translation-en_US                  
Ign http://ftp.us.debian.org stable/non-free Translation-en_US                 
Get:2 http://ftp.us.debian.org testing Release.gpg [835B]                      
Ign http://ftp.us.debian.org testing/main Translation-en_US                    
Ign http://ftp.us.debian.org testing/contrib Translation-en_US                 
Get:3 http://security.debian.org testing/updates Release.gpg [835B]            
Ign http://security.debian.org testing/updates/main Translation-en_US          
Ign http://security.debian.org testing/updates/contrib Translation-en_US       
Ign http://ftp.us.debian.org testing/non-free Translation-en_US                
Get:4 http://ftp.us.debian.org stable Release [73.6kB]                         
Ign http://security.debian.org testing/updates/non-free Translation-en_US      
Get:5 http://security.debian.org testing/updates Release [37.7kB]              
Get:6 http://fr1.mepis-deb.org mepis-8.0 Release.gpg [197B]                    
Ign http://fr1.mepis-deb.org mepis-8.0/main Translation-en_US                  
Get:7 http://fr1.mepis-deb.org mepis-8.0 Release [2,314B]                      
Get:8 http://ftp.us.debian.org testing Release [89.5kB]                        
Get:9 http://security.debian.org testing/updates/main Packages [9,598B]        
Ign http://fr1.mepis-deb.org mepis-8.0/main Packages                           
Get:10 http://security.debian.org testing/updates/contrib Packages [14B]       
Get:11 http://security.debian.org testing/updates/non-free Packages [14B]      
Ign http://fr1.mepis-deb.org mepis-8.0/main Packages                           
Get:12 http://ftp.us.debian.org stable/main Packages [5,294kB]      
Get:13 http://fr1.mepis-deb.org mepis-8.0/main Packages [171kB]                
Get:14 http://www.debian-multimedia.org stable Release.gpg [198B]              
Get:15 http://www.debian-multimedia.org stable/main Translation-en_US [14B]    
Get:16 http://www.debian-multimedia.org testing Release.gpg [198B]             
Get:17 http://www.debian-multimedia.org testing/main Translation-en_US [14B]   
Get:18 http://www.debian-multimedia.org stable Release [12.9kB]                
Get:19 http://www.debian-multimedia.org testing Release [13.2kB]               
Get:20 http://www.debian-multimedia.org stable/main Packages [70.0kB]          
Get:21 http://www.debian-multimedia.org testing/main Packages [61.3kB]         
Get:22 http://ftp.us.debian.org stable/contrib Packages [76.1kB]               
Get:23 http://ftp.us.debian.org stable/non-free Packages [100kB]               
Get:24 http://ftp.us.debian.org testing/main Packages [6,027kB]                
Get:25 http://ftp.us.debian.org testing/contrib Packages [53.2kB]              
Get:26 http://ftp.us.debian.org testing/non-free Packages [102kB]              
Fetched 12.2MB in 58s (208kB/s)                                                
Reading package lists... Done
biker:/home/harry# apt-get install wicd
Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following NEW packages will be installed:
  wicd
0 upgraded, 1 newly installed, 0 to remove and 159 not upgraded.
Need to get 416kB of archives.
After this operation, 2,585kB of additional disk space will be used.
Get:1 http://ftp.us.debian.org testing/main wicd 1.6.2.2-3 [416kB]
Fetched 416kB in 3s (136kB/s)
Preconfiguring packages ...
adduser: The user `demo' does not exist.
wicd failed to preconfigure, with exit status 1
Selecting previously deselected package wicd.
(Reading database ... 63178 files and directories currently installed.)
Unpacking wicd (from .../wicd_1.6.2.2-3_all.deb) ...
Processing triggers for hicolor-icon-theme ...
Processing triggers for menu ...
Processing triggers for desktop-file-utils ...
Processing triggers for man-db ...
Setting up wicd (1.6.2.2-3) ...
adduser: The user `demo' does not exist.
dpkg: error processing wicd (--configure):
 subprocess installed post-installation script returned error exit status 1
Errors were encountered while processing:
 wicd
E: Sub-process /usr/bin/dpkg returned an error code (1)
biker:/home/harry#
Posts: 4,164
rokytnji
Joined: 20 Feb 2009
#65
Taking rutilt off dhcp setting seems to have fixed the freeze issue. Icon now stays on the taskbar. I commented out sleep 2 && wicd-client & entry in .icewm startup and wicd-client &. If I could save my connection settings in rutilt instead of reconnecting manually each time I log out I will be good to go. I add rutilt & to startup for .icewm and .fluxbox startup files. But that just brings up the start connection window. No active connection saved from last session.
Posts: 4,164
rokytnji
Joined: 20 Feb 2009
#66
Stayed up Late. Decided on a reinstall to start fresh. Did my reinstall. Then first thing was research dbus errors for wicd in Debian. Found a bug report like I was having with dbus messages in wicd 1.6.

Basically they said do a apt-get update. Which I did. Took it one step further and did a apt-get upgrade. Then reboot.

Got rid of the dbus message opening wicd. But Nothing is seen in wicd. But somehow I found a workaround messing with the taskbar icon. Left click just brought up the empty window in screenshot 1 below. Right click icon and it would scan and find my Network. Connects up like Ubuntu Network Manager though there is no Automatic option checkbox in the icon window. So Wireless works in wicd. Just strange as hell, like it is a crippled Network manager (Ubuntu like, creepy). Rutilt works but doesn't stick on reboot. Ceni nevers sees my ip address but sees my router. Any hows. Thumbnails below.

Image

Image

Image
anticapitalista
Posts: 5,955
Site Admin
Joined: 11 Sep 2007
#67
lagopus,

I think I have found the 'problem' with gksu and the antix2usb-gui.sh script. Nothing to do with your script, but I had left the older antix2usb.sh part to get transferred.
Hopefully now fixed.
Sorry for the headache that it caused.
anticapitalista
Posts: 5,955
Site Admin
Joined: 11 Sep 2007
#68
False alarm.
antiX-base works fine with antix2usb-gui.sh and calls gksu for root.

Still not working on antiX-full. I think the problem is something to do with dbus and gksu.
sudo antix2usb-gui.sh does work fine, so I will use this in the antiXcc at least for the next test release on antiX-full (coming very soon).

There needs to be a couple of changes to the script though.

1. /etc/init.d/hal stop before the script starts its work and /etc/init.d/hal start when it has finished.
2. Some warning perhaps or check that the usb stick is not mounted or if it is to tell users to unmount via rox/pcmanfm before running the script/gui
Posts: 200
lagopus
Joined: 15 Oct 2008
#69
anti,

I made a 180 degree turn (is it correct in english?) for antix2usb-gui.
Back to pygtk (glade not needed)
I did not have full control on the bash/gtkdialog script. The headache came with passing parameters forth and back between bash and gtkdialog.

I hope I will have a working gui at the end of the weekend. Got to write a pair of callbacks and plug in the script.
Same controls, same minimal set of parameters, but no more roxterm: the output of the shell will be redirected to a Text Widget.
With pygtk, I'll have more control on the parameters, on error conditions (interrupt from keyboard...)
gksu will be called from the menu and will launch the gui, instead of gksu being called somewhere between a gtkdialog shell and a roxterm...
And later... localisation with gettext.

I have also to take into account your suggestions and BitJam's ones.

After that I hope I'll have more time to test/to use M8.5 !!
Posts: 1,228
secipolla
Joined: 15 Jun 2008
#70
anti, please update /usr/share/locale/pt_BR/LC_MESSAGES/rox.mo
Currently it's almost not translated (I've sent the .po file as a patch to rox-filer).

Also please update IceWM's pt_BR menu changing 'Lousa' for 'Quadro' to match the term adopted in the translation:

Code: Select all

menu"Área de trabalho" /home/sergio/.icons/Polar-Icons-2/scalable/places/user-desktop.png {
   menu"IceWM" folder {
      prog"Editor do menu" - icemc
      prog"Reiniciar IceWM" - killall -HUP icewm
   }
   menu"Alternativas" folder {
      prog"Painel Rox lig./desl." - paneltoggle.sh
      prog"Lousa Rox lig./desl." - pinboardtoggle.sh  <= change 'Lousa' for 'Quadro' here.
   }
Thanks.

File at
========= SCRAPER REMOVED AN EMBEDDED LINK HERE ===========
url was:"antix.freeforu ms.org/post13621.html#p13621"
linktext was:"antix.freeforu ms.org/post13621.html#p13621"
====================================
" onclick="window.open(this.href);return false
Last edited by secipolla on 28 Nov 2009, 15:29, edited 1 time in total.
anticapitalista
Posts: 5,955
Site Admin
Joined: 11 Sep 2007
#71
secipolla - done.
Posts: 1,228
secipolla
Joined: 15 Jun 2008
#72
I thank you, anti.
But as an irony, after all the transalation work I found that I missed to fix the tiny error (missing space at the end of the symlink mouse tip) that first led me to look at the translation.
But now it's fixed and I uploaded a new file at
========= SCRAPER REMOVED AN EMBEDDED LINK HERE ===========
url was:"antix.freeforu ms.org/post13621.html#p13621"
linktext was:"antix.freeforu ms.org/post13621.html#p13621"
====================================
" onclick="window.open(this.href);return false

If I see that there are other things then I may upload the original pt_BR.po file but I don't think there will be.
Posts: 1,228
secipolla
Joined: 15 Jun 2008
#73
There's a link bookmarked in OU812's folder to a blog (I think it's called 'use Icewm') that is dead.

Just commenting: do people use cdw (the ncurses burning app)? I tried to blank a cd-rw with it and it would 'freeze' and I remember I didn't have much luck with it before too. So I ended blanking from the command line with cdrdao (easy) and burning with 'burn', a command line tool (very easy, but must look out for it not to delete the iso at the end - I used it because I didn't figure how to do with wodim just taking a look at the manual). <- BTW, this refers to antiX-base.

Edit- oh god, it's not the first time I post in an older test topic, there are so many of them... __{{emoticon}}__