When do you get the blinking cursor? Right at the beginning?
Usually this is a bad burn.
md5sum is here:
========= SCRAPER REMOVED AN EMBEDDED LINK HERE ===========
url was:"http://www.mepisimo.com/antix/Testing/"
linktext was:"http://www.mepisimo.com/antix/Testing/"
====================================
burn slow, x4.
-
anticapitalista
Posts: 5,955
- Site Admin
- Joined: 11 Sep 2007
-
JXRPosts: 57
- Joined: 16 Apr 2012
#77
Checked MD5 checksums. (Thanks for supplying the checksum.) They're the same.
Made CD at minimum speed so that shouldn't be the problem. (anyway the intro splashscreen shows up right)
Still just getting a blinking cursor (on a dark background).
Made CD at minimum speed so that shouldn't be the problem. (anyway the intro splashscreen shows up right)
Still just getting a blinking cursor (on a dark background).
-
Posts: 57
JXR - Joined: 16 Apr 2012
#78
I get the blinking cursor immediately after I choose"antiX-base-desktop" (or the other options).
(Minimum burn speed I have available is 8x. Used all other InfraRecorder defaults: [General] Buffer underrun protection; Pad data tracks; Close the disk after writing; Eject the disk after writing(!); [Advanced] Allow overburning )
(Minimum burn speed I have available is 8x. Used all other InfraRecorder defaults: [General] Buffer underrun protection; Pad data tracks; Close the disk after writing; Eject the disk after writing(!); [Advanced] Allow overburning )
-
anticapitalista
Posts: 5,955
- Site Admin
- Joined: 11 Sep 2007
#79
Like I said, that is usually down to a bad burn or bad media.
-
JXRPosts: 57
- Joined: 16 Apr 2012
#80
Tried again. Same results. (Looks like I'll have to search around for an old old old CD writer.)
Can you recommend a url that describes how to burn an iso on a (memory) stick? Some sort of stick-InfraRecorder Maybe that's more reliable than a CD. (Anyway, CDs are hard to come by these days. Most of the major BigBox stores [e.g., COSTCO] have stopped carrying them (DVDs also!!) and the smaller ones are offering them at a huge price markup.)
btw: Is there some way to"checksum" the material on the burned CD?
Can you recommend a url that describes how to burn an iso on a (memory) stick? Some sort of stick-InfraRecorder Maybe that's more reliable than a CD. (Anyway, CDs are hard to come by these days. Most of the major BigBox stores [e.g., COSTCO] have stopped carrying them (DVDs also!!) and the smaller ones are offering them at a huge price markup.)
btw: Is there some way to"checksum" the material on the burned CD?
-
Posts: 57
JXR - Joined: 16 Apr 2012
#81
USB Installer question:
I'm looking at pendrivelinux.com and notice that it seems the program needs to be preprogrammed to recognize different Linux releases...down to distribution level (e.g., Mint 13, Cinnamon, WifiWay 3.4, Dreamlinux 5...)!
Since antiX-base-t3.iso is still in testing phase I assume it is not supported by this particular program.
Is there a (general purpose) program or procedure out there that will create a bootable USB stick for AntiX distributions?
Or a (specific) program or procedure that will create a bootable USB stick for antiX-base-t3.iso?
I'm looking at pendrivelinux.com and notice that it seems the program needs to be preprogrammed to recognize different Linux releases...down to distribution level (e.g., Mint 13, Cinnamon, WifiWay 3.4, Dreamlinux 5...)!
Since antiX-base-t3.iso is still in testing phase I assume it is not supported by this particular program.
Is there a (general purpose) program or procedure out there that will create a bootable USB stick for AntiX distributions?
Or a (specific) program or procedure that will create a bootable USB stick for antiX-base-t3.iso?
-
rokytnjiPosts: 4,164
- Joined: 20 Feb 2009
#82
I've gotten unetbootin to boot antix on a pendrive. If your bios is old and won't boot off of pendrive. I also installed antix via pendrive on my IBM a22m laptop with usb 1.1 and no bios support for booting pendrive.
post20495.html#p20495
I have a floppy drive on this IBM a22m I used to boot the pendrive with a Plop boot floppy disk I made.
========= SCRAPER REMOVED AN EMBEDDED LINK HERE ===========
url was:"http://www.plop.at/en/bootmanager/plpbt.bin.html#runflp"
linktext was:"http://www.plop.at/en/bootmanager/plpbt.bin.html#runflp"
====================================
Just in case you have a floppy drive also, (I don't know)
You can also make a PLOP boot cdrom disk instead if no floppy drive.
========= SCRAPER REMOVED AN EMBEDDED LINK HERE ===========
url was:"http://www.plop.at/en/bootmanager/plpbt.bin.html#runcd"
linktext was:"http://www.plop.at/en/bootmanager/plpbt.bin.html#runcd"
====================================
Like I said. I made the pendrive though with Unetbootin
========= SCRAPER REMOVED AN EMBEDDED LINK HERE ===========
url was:"http://unetbootin.sourceforge.net/"
linktext was:"http://unetbootin.sourceforge.net/"
====================================
.
I'd suggest also cdrw disks. I find them at the dollar store. 5 pack. But. Some old cdrom drives won't boot cdrw disks either sometimes. At least in my experience.
post20495.html#p20495
I have a floppy drive on this IBM a22m I used to boot the pendrive with a Plop boot floppy disk I made.
========= SCRAPER REMOVED AN EMBEDDED LINK HERE ===========
url was:"http://www.plop.at/en/bootmanager/plpbt.bin.html#runflp"
linktext was:"http://www.plop.at/en/bootmanager/plpbt.bin.html#runflp"
====================================
Just in case you have a floppy drive also, (I don't know)
You can also make a PLOP boot cdrom disk instead if no floppy drive.
========= SCRAPER REMOVED AN EMBEDDED LINK HERE ===========
url was:"http://www.plop.at/en/bootmanager/plpbt.bin.html#runcd"
linktext was:"http://www.plop.at/en/bootmanager/plpbt.bin.html#runcd"
====================================
Like I said. I made the pendrive though with Unetbootin
========= SCRAPER REMOVED AN EMBEDDED LINK HERE ===========
url was:"http://unetbootin.sourceforge.net/"
linktext was:"http://unetbootin.sourceforge.net/"
====================================
.
I'd suggest also cdrw disks. I find them at the dollar store. 5 pack. But. Some old cdrom drives won't boot cdrw disks either sometimes. At least in my experience.
-
JXRPosts: 57
- Joined: 16 Apr 2012
#83
Floppy drive...hmmm...oh you must mean that slot used to hold business cards... __{{emoticon}}__
Although the prospect of using a floppy disk to do anything these days is enticing, I'll first try UNetbootin.
1) I went back to my main Windows machine (where the t3.iso is located) downloaded Unetbootin, and"installed" the .iso onto a 4 Gb stick.
2) I safely uninstalled (and ejected) the stick, put it into this laptop (the one with AntiX/Windows dual boot), and rebooted the machine...
3) I immediately hit F2 to make sure EVERYTHING (CD ROM Drive, Cardbus NIC, Onboard NIC) came BEFORE the Hard Drive in the boot sequence.
4) The computer thought a while...and booted off the hard drive.
My conclusion would be that a Dell Inspiron (or any computer) has no way of booting off a memory stick--that no usb device can be recognized until after the boot sequence has taken place--but if that were true, programs like Unetbootin would never work.
What did I do wrong?
Although the prospect of using a floppy disk to do anything these days is enticing, I'll first try UNetbootin.
1) I went back to my main Windows machine (where the t3.iso is located) downloaded Unetbootin, and"installed" the .iso onto a 4 Gb stick.
2) I safely uninstalled (and ejected) the stick, put it into this laptop (the one with AntiX/Windows dual boot), and rebooted the machine...
3) I immediately hit F2 to make sure EVERYTHING (CD ROM Drive, Cardbus NIC, Onboard NIC) came BEFORE the Hard Drive in the boot sequence.
4) The computer thought a while...and booted off the hard drive.
My conclusion would be that a Dell Inspiron (or any computer) has no way of booting off a memory stick--that no usb device can be recognized until after the boot sequence has taken place--but if that were true, programs like Unetbootin would never work.
What did I do wrong?
-
rokytnjiPosts: 4,164
- Joined: 20 Feb 2009
#84
Reason I say this.
onboard nic is not usb
and of course. cdrom is not usb. Hence bios is too old with no usb boot option. Just like this IBM A22M I am posting with right now.
Bios is too old to boot from usb. Refer to my previous post on making a PLOP boot manager cd.What did I do wrong?
Reason I say this.
cardbus nic is not usb3) I immediately hit F2 to make sure EVERYTHING (CD ROM Drive, Cardbus NIC, Onboard NIC) came BEFORE the Hard Drive in the boot sequence.
onboard nic is not usb
and of course. cdrom is not usb. Hence bios is too old with no usb boot option. Just like this IBM A22M I am posting with right now.
Code: Select all
Machine: Mobo: IBM model: 2628TWU Bios: IBM version: KXET33WW (1.06 ) date: 09/05/2001
-
JXRPosts: 57
- Joined: 16 Apr 2012
#85
thought so...
So I made a a Plop boot floppy disk.
UNetbootin'd the antiX-base-t3.iso onto an empty memory stick (USB).
Restarted and menu'd [USB...] my way down to UNetbootin:
Default
antiX-base-686 (LiveUSB)
antiX-base-686 (Home Persistence)
antiX-memtest (test system memory)
antiX-base (desktop)
antiX-fluxbox-no-icons
antiX-fluxbox-desktop-nouveau
antiX-add-cheats-xorg
antiX-home-persist
antiX-root-persist
choose antiX-base-686 (LiveUSB)
screen went dark (no blinking cursor)
[tried again a few times; reformatted and re-UNetbootin'd the antiX-base-t3.iso onto the memory stick (USB) (it reported the files were all there and I had it rewrite over them) - same results]
So I made a a Plop boot floppy disk.
UNetbootin'd the antiX-base-t3.iso onto an empty memory stick (USB).
Restarted and menu'd [USB...] my way down to UNetbootin:
Default
antiX-base-686 (LiveUSB)
antiX-base-686 (Home Persistence)
antiX-memtest (test system memory)
antiX-base (desktop)
antiX-fluxbox-no-icons
antiX-fluxbox-desktop-nouveau
antiX-add-cheats-xorg
antiX-home-persist
antiX-root-persist
choose antiX-base-686 (LiveUSB)
screen went dark (no blinking cursor)
[tried again a few times; reformatted and re-UNetbootin'd the antiX-base-t3.iso onto the memory stick (USB) (it reported the files were all there and I had it rewrite over them) - same results]
-
rokytnjiPosts: 4,164
- Joined: 20 Feb 2009
#86
Try a few other menu options like antix_fluxbox-no-icons maybe.
-
JXRPosts: 57
- Joined: 16 Apr 2012
#87
All the other options either work the same way (just a dark screen) or don't respond at all (the UNetbootin screen stays up)
except: antiX-memtest (test system memory) which responds with the message (a clue maybe??)"cannot load a ramdisk with an old kernal image"
except: antiX-memtest (test system memory) which responds with the message (a clue maybe??)"cannot load a ramdisk with an old kernal image"
-
JXRPosts: 57
- Joined: 16 Apr 2012
#88
I GOT A NEW WIRELESS CARD!!!
Since:
a) AntiX (current version) does not seem to accommodate the Belkin wireless Cardbus card.
b) I am unable to get the new (testing) version to work either through a LiveCD install or a Plop boot floppy disk/UNetbootin memory stick install.
I’ve gone a different route. __{{emoticon}}__
I’ve secured a (new!) AirLink Super G Wireless Cardbus Adapter. (a wireless card like the Belkin, only not a Belkin) Model# AWLC4130
Now the card comes with a CD and installation guide for Windows, but I don’t think I should have to install it in Windows in order to get it to work in Linux (otherwise no one would have single Linux boot machines, for hardware install purposes)
Problem is, AntiX doesn’t seem to recognize this card either.
Is there some sort of install routine I need to go through in Linux to get this card to work?
Since:
a) AntiX (current version) does not seem to accommodate the Belkin wireless Cardbus card.
b) I am unable to get the new (testing) version to work either through a LiveCD install or a Plop boot floppy disk/UNetbootin memory stick install.
I’ve gone a different route. __{{emoticon}}__
I’ve secured a (new!) AirLink Super G Wireless Cardbus Adapter. (a wireless card like the Belkin, only not a Belkin) Model# AWLC4130
Now the card comes with a CD and installation guide for Windows, but I don’t think I should have to install it in Windows in order to get it to work in Linux (otherwise no one would have single Linux boot machines, for hardware install purposes)
Problem is, AntiX doesn’t seem to recognize this card either.
Is there some sort of install routine I need to go through in Linux to get this card to work?
-
rokytnjiPosts: 4,164
- Joined: 20 Feb 2009
#89
Not enough info yet to say anything yet about that new card you are using.Problem is, AntiX doesn’t seem to recognize this card either. Is there some sort of install routine I need to go through in Linux to get this card to work?
-
JXRPosts: 57
- Joined: 16 Apr 2012
#90
Code: Select all
root@antiX1:/home/joost# ifconfig
eth0 Link encap:Ethernet HWaddr 00:08:74:e2:88:62
inet addr:192.168.1.103 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:9193 errors:0 dropped:0 overruns:0 frame:0
TX packets:6718 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:3175310 (3.0 MiB) TX bytes:1147342 (1.0 MiB)
Interrupt:10 Base address:0xa000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:2 errors:0 dropped:0 overruns:0 frame:0
TX packets:2 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:100 (100.0 B) TX bytes:100 (100.0 B)Code: Select all
root@antiX1:/home/joost# inxi -F
System: Host antiX1 Kernel 2.6.36-1-mepis-smp i686 (32 bit) Distro antiX-M11-686 Jayaben Desai 01 May 2011
CPU: Single core Mobile Intel Pentium 4 - M (-UP-) cache 512 KB flags (sse sse2) bmips 2392.5 clocked at 1200.00 MHz
Graphics: Card: nVidia NV11 [GeForce2 Go] bus-ID: 01:00.0 X.org 1.9.5 Res: 80x24 Gfx Data: N/A for root
Audio: Card Intel 82801CA/CAM AC'97 Audio Controller driver Intel ICH ports 1c00 1880 bus-ID: 00:1f.5
Sound: Advanced Linux Sound Architecture Version 1.0.23
Network: Card-1 3Com 3c905C-TX/TX-M [Tornado] driver 3c59x port 3000 bus-ID: 02:01.0
Card-2 Atheros Atheros AR5001X+ Wireless Network Adapter driver ath5k v: 0.6.0 bus-ID: 03:00.0
Disks: HDD Total Size: 30.0GB (7.2% used) 1: /dev/sda HITACHI_DK23EA 30.0GB
Partition: ID:/ size: 9.5G used: 2.1G (23%) fs: ext3 ID:swap-1 size: 0.55GB used: 0.00GB (0%) fs: swap
Info: Processes 84 Uptime 2:01 Memory 132.8/246.9MB Runlevel 5 Client Shell inxi 1.4.95
Code: Select all
root@antiX1:/home/joost# dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.36-1-mepis-smp (MEPIS 2.6.36-4mepis2) (max@stro.at) (gcc version 4.4.5 (Debian 4.4.5-8) ) #1 SMP Thu Mar 31 17:07:18 CDT 2011
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000000fef0000 (usable)
[ 0.000000] BIOS-e820: 000000000fef0000 - 000000000feff000 (ACPI data)
[ 0.000000] BIOS-e820: 000000000feff000 - 000000000ff00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000000ff00000 - 000000000ff80000 (usable)
[ 0.000000] BIOS-e820: 000000000ff80000 - 0000000010000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS!
[ 0.000000] DMI 2.3 present.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0xff80 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FF0000000 write-back
[ 0.000000] 1 base 00FF80000 mask FFFF80000 uncachable
[ 0.000000] 2 base 00FF80000 mask FFFF80000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-000000000ff80000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 000fc00000 page 2M
[ 0.000000] 000fc00000 - 000ff80000 page 4k
[ 0.000000] kernel direct mapping tables up to ff80000 @ 7000-c000
[ 0.000000] RAMDISK: 0f5b0000 - 0fee0000
[ 0.000000] ACPI: RSDP 000f6740 00014 (v00 DELL )
[ 0.000000] ACPI: RSDT 0fefadcf 00028 (v01 DELL RSDT 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 0fefef8c 00074 (v01 INTEL 845M 06040000 PTL 0000004B)
[ 0.000000] ACPI: DSDT 0fefadf7 04195 (v01 DELL 845M 06040000 MSFT 0100000D)
[ 0.000000] ACPI: FACS 0fefffc0 00040
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 255MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 0ff80000
[ 0.000000] low ram: 0 - 0ff80000
[ 0.000000] node 0 low ram: 00000000 - 0ff80000
[ 0.000000] node 0 bootmap 00008000 - 00009ff0
[ 0.000000] (9/32 early reservations) ==> bootmem [0000000000 - 000ff80000]
[ 0.000000] #0 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #1 [0001000000 - 000163b758] TEXT DATA BSS ==> [0001000000 - 000163b758]
[ 0.000000] #2 [000f5b0000 - 000fee0000] RAMDISK ==> [000f5b0000 - 000fee0000]
[ 0.000000] #3 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
[ 0.000000] #4 [000163c000 - 00016421bc] BRK ==> [000163c000 - 00016421bc]
[ 0.000000] #5 [0000002000 - 0000003000] TRAMPOLINE ==> [0000002000 - 0000003000]
[ 0.000000] #6 [0000003000 - 0000007000] ACPI WAKEUP ==> [0000003000 - 0000007000]
[ 0.000000] #7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #8 [0000008000 - 000000a000] BOOTMAP ==> [0000008000 - 000000a000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000001 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0000ff80
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000001 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0000fef0
[ 0.000000] 0: 0x0000ff00 -> 0x0000ff80
[ 0.000000] On node 0 totalpages: 65294
[ 0.000000] free_area_init_node: node 0, pgdat c1544800, node_mem_map c1644020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3966 pages, LIFO batch:0
[ 0.000000] Normal zone: 479 pages used for memmap
[ 0.000000] Normal zone: 60817 pages, LIFO batch:15
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with"lapic"
[ 0.000000] APIC: disable apic facility
[ 0.000000] APIC: switched to apic NOOP
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 000000000fef0000 - 000000000feff000
[ 0.000000] PM: Registered nosave memory: 000000000feff000 - 000000000ff00000
[ 0.000000] Allocating PCI resources starting at 10000000 (gap: 10000000:ef800000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @c1c00000 s31040 r0 d22208 u4194304
[ 0.000000] pcpu-alloc: s31040 r0 d22208 u4194304 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64783
[ 0.000000] Kernel command line: root=/dev/sda6 nomce quiet nosplash nouveau.modeset=0 vga=791
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 243008k/261632k available (3673k kernel code, 18168k reserved, 1740k data, 412k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xd0780000 - 0xff7fe000 ( 752 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xcff80000 ( 255 MB)
[ 0.000000] .init : 0xc154a000 - 0xc15b1000 ( 412 kB)
[ 0.000000] .data : 0xc1396489 - 0xc1549530 (1740 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1396489 (3673 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1794.375 MHz processor.
[ 0.004008] Calibrating delay loop (skipped), value calculated using timer frequency.. 3588.75 BogoMIPS (lpj=7177500)
[ 0.004017] pid_max: default: 32768 minimum: 301
[ 0.004050] Security Framework initialized
[ 0.004059] SELinux: Disabled at boot.
[ 0.004076] Mount-cache hash table entries: 512
[ 0.004317] Initializing cgroup subsys ns
[ 0.004325] Initializing cgroup subsys cpuacct
[ 0.004333] Initializing cgroup subsys devices
[ 0.004338] Initializing cgroup subsys freezer
[ 0.004342] Initializing cgroup subsys net_cls
[ 0.004347] Initializing cgroup subsys blkio
[ 0.004410] CPU0: Hyper-Threading is disabled
[ 0.004434] Performance Events: Netburst events,
[ 0.004442] no APIC, boot with the"lapic" boot parameter to force-enable it.
[ 0.004446] no hardware sampling interrupt available.
[ 0.004450] Netburst P4/Xeon PMU driver.
[ 0.004486] ... version: 0
[ 0.004490] ... bit width: 40
[ 0.004493] ... generic registers: 18
[ 0.004498] ... value mask: 000000ffffffffff
[ 0.004502] ... max period: 0000007fffffffff
[ 0.004505] ... fixed-purpose events: 0
[ 0.004509] ... event mask: 000000000003ffff
[ 0.005314] SMP alternatives: switching to UP code
[ 0.020578] Freeing SMP alternatives: 20k freed
[ 0.020605] ACPI: Core revision 20100702
[ 0.028568] ACPI: setting ELCR to 0200 (from 0c00)
[ 0.032134] weird, boot CPU (#0) not listed by the BIOS.
[ 0.032138] SMP motherboard not detected.
[ 0.032143] Local APIC not detected. Using dummy APIC emulation.
[ 0.032146] SMP disabled
[ 0.032294] Brought up 1 CPUs
[ 0.032299] Total of 1 processors activated (3588.75 BogoMIPS).
[ 0.032440] devtmpfs: initialized
[ 0.033146] regulator: core version 0.5
[ 0.033226] NET: Registered protocol family 16
[ 0.033412] ACPI: bus type pci registered
[ 0.037140] PCI: PCI BIOS revision 2.10 entry at 0xfd9c5, last bus=2
[ 0.037145] PCI: Using configuration type 1 for base access
[ 0.038636] bio: create slab <bio-0> at 0
[ 0.039818] ACPI: EC: Look up EC in DSDT
[ 0.042828] ACPI: Interpreter enabled
[ 0.042840] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.042879] ACPI: Using PIC for interrupt routing
[ 0.049466] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.049668] ACPI: No dock devices found.
[ 0.049677] PCI: Ignoring host bridge windows from ACPI; if necessary, use"pci=use_crs" and report a bug
[ 0.050727] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.053777] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.053784] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.053789] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.053796] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
[ 0.053801] pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[ 0.053806] pci_root PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[ 0.053814] pci_root PNP0A03:00: host bridge window [mem 0x10000000-0xfebfffff] (ignored)
[ 0.053846] pci 0000:00:00.0: reg 10: [mem 0xec000000-0xefffffff pref]
[ 0.054045] pci 0000:00:1d.0: reg 20: [io 0x1800-0x181f]
[ 0.054146] pci 0000:00:1d.1: reg 20: [io 0x1820-0x183f]
[ 0.054334] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH4 ACPI/GPIO/TCO
[ 0.054341] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH4 GPIO
[ 0.054384] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.054399] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.054413] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
[ 0.054427] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
[ 0.054441] pci 0000:00:1f.1: reg 20: [io 0x1840-0x184f]
[ 0.054456] pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff]
[ 0.054549] pci 0000:00:1f.3: reg 20: [io 0x1860-0x187f]
[ 0.054612] pci 0000:00:1f.5: reg 10: [io 0x1c00-0x1cff]
[ 0.054626] pci 0000:00:1f.5: reg 14: [io 0x1880-0x18bf]
[ 0.054716] pci 0000:00:1f.6: reg 10: [io 0x2400-0x24ff]
[ 0.054731] pci 0000:00:1f.6: reg 14: [io 0x2000-0x207f]
[ 0.054841] pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xe0ffffff]
[ 0.054854] pci 0000:01:00.0: reg 14: [mem 0xf0000000-0xf7ffffff pref]
[ 0.054895] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.054966] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.054973] pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.054980] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe7ffffff]
[ 0.054987] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf7ffffff pref]
[ 0.055042] pci 0000:02:01.0: reg 10: [io 0x3000-0x307f]
[ 0.055056] pci 0000:02:01.0: reg 14: [mem 0xe8000000-0xe800007f]
[ 0.055106] pci 0000:02:01.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.055131] pci 0000:02:01.0: supports D1 D2
[ 0.055135] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.055142] pci 0000:02:01.0: PME# disabled
[ 0.055190] pci 0000:02:04.0: reg 10: [mem 0x00000000-0x00000fff]
[ 0.055217] pci 0000:02:04.0: supports D1 D2
[ 0.055221] pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.055228] pci 0000:02:04.0: PME# disabled
[ 0.055278] pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode)
[ 0.055286] pci 0000:00:1e.0: bridge window [io 0x3000-0x3fff]
[ 0.055294] pci 0000:00:1e.0: bridge window [mem 0xe8000000-0xe80fffff]
[ 0.055302] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.055308] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.055313] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[ 0.055363] pci_bus 0000:03: [bus 03-06] partially hidden behind transparent bridge 0000:02 [bus 02-02]
[ 0.055383] pci_bus 0000:00: on NUMA node 0
[ 0.055390] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.055624] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
[ 0.055721] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.058519] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 0.058694] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 0.058831] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.058997] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.059062] HEST: Table is not found!
[ 0.059184] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.059191] vgaarb: loaded
[ 0.059396] SCSI subsystem initialized
[ 0.059475] libata version 3.00 loaded.
[ 0.059537] usbcore: registered new interface driver usbfs
[ 0.059570] usbcore: registered new interface driver hub
[ 0.059613] usbcore: registered new device driver usb
[ 0.059714] PCI: Using ACPI for IRQ routing
[ 0.059722] PCI: pci_cache_line_size set to 64 bytes
[ 0.059797] reserve RAM buffer: 000000000009f000 - 000000000009ffff
[ 0.059803] reserve RAM buffer: 000000000fef0000 - 000000000fffffff
[ 0.059808] reserve RAM buffer: 000000000ff80000 - 000000000fffffff
[ 0.060031] Switching to clocksource tsc
[ 0.060104] pnp: PnP ACPI init
[ 0.060124] ACPI: bus type pnp registered
[ 0.061923] pnp 00:04: disabling [mem 0x00010000-0x0001ffff] because it overlaps 0000:02:01.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 0.065349] pnp: PnP ACPI: found 9 devices
[ 0.065354] ACPI: ACPI bus type pnp unregistered
[ 0.065363] PnPBIOS: Disabled by ACPI PNP
[ 0.065386] system 00:04: [io 0x0600-0x060f] has been reserved
[ 0.065393] system 00:04: [io 0x0700-0x070f] has been reserved
[ 0.065398] system 00:04: [io 0x1000-0x107f] has been reserved
[ 0.065404] system 00:04: [io 0x1180-0x11bf] has been reserved
[ 0.065409] system 00:04: [io 0x1200-0x120f] has been reserved
[ 0.065414] system 00:04: [io 0xfe00-0xfe01] has been reserved
[ 0.065420] system 00:04: [io 0xfff0-0xfffe] has been reserved
[ 0.065426] system 00:04: [mem 0xfebffc00-0xfebfffff] has been reserved
[ 0.065432] system 00:04: [mem 0xfff80000-0xffffffff] has been reserved
[ 0.102972] pci 0000:00:1e.0: BAR 15: assigned [mem 0x10000000-0x15ffffff pref]
[ 0.102980] pci 0000:00:1f.1: BAR 5: assigned [mem 0x16000000-0x160003ff]
[ 0.102990] pci 0000:00:1f.1: BAR 5: set to [mem 0x16000000-0x160003ff] (PCI address [0x16000000-0x160003ff]
[ 0.102998] pci 0000:01:00.0: BAR 6: assigned [mem 0xe1000000-0xe100ffff pref]
[ 0.103004] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.103008] pci 0000:00:01.0: bridge window [io disabled]
[ 0.103015] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe7ffffff]
[ 0.103022] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf7ffffff pref]
[ 0.103033] pci 0000:02:04.0: BAR 15: assigned [mem 0x10000000-0x13ffffff pref]
[ 0.103040] pci 0000:02:04.0: BAR 16: assigned [mem 0x18000000-0x1bffffff]
[ 0.103046] pci 0000:02:01.0: BAR 6: assigned [mem 0x14000000-0x1401ffff pref]
[ 0.103052] pci 0000:02:04.0: BAR 0: assigned [mem 0xe8001000-0xe8001fff]
[ 0.103061] pci 0000:02:04.0: BAR 0: set to [mem 0xe8001000-0xe8001fff] (PCI address [0xe8001000-0xe8001fff]
[ 0.103067] pci 0000:02:04.0: BAR 13: assigned [io 0x3400-0x34ff]
[ 0.103073] pci 0000:02:04.0: BAR 14: assigned [io 0x3800-0x38ff]
[ 0.103078] pci 0000:02:04.0: CardBus bridge to [bus 03-06]
[ 0.103082] pci 0000:02:04.0: bridge window [io 0x3400-0x34ff]
[ 0.103089] pci 0000:02:04.0: bridge window [io 0x3800-0x38ff]
[ 0.103097] pci 0000:02:04.0: bridge window [mem 0x10000000-0x13ffffff pref]
[ 0.103104] pci 0000:02:04.0: bridge window [mem 0x18000000-0x1bffffff]
[ 0.103112] pci 0000:00:1e.0: PCI bridge to [bus 02-02]
[ 0.103118] pci 0000:00:1e.0: bridge window [io 0x3000-0x3fff]
[ 0.103126] pci 0000:00:1e.0: bridge window [mem 0xe8000000-0xe80fffff]
[ 0.103134] pci 0000:00:1e.0: bridge window [mem 0x10000000-0x15ffffff pref]
[ 0.103162] pci 0000:00:1e.0: setting latency timer to 64
[ 0.103252] pci 0000:02:04.0: power state changed by ACPI to D0
[ 0.103284] pci 0000:02:04.0: power state changed by ACPI to D0
[ 0.103530] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[ 0.103536] PCI: setting IRQ 10 as level-triggered
[ 0.103545] pci 0000:02:04.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
[ 0.103555] pci 0000:02:04.0: setting latency timer to 64
[ 0.103562] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.103567] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[ 0.103572] pci_bus 0000:01: resource 1 [mem 0xe0000000-0xe7ffffff]
[ 0.103577] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf7ffffff pref]
[ 0.103582] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.103587] pci_bus 0000:02: resource 1 [mem 0xe8000000-0xe80fffff]
[ 0.103592] pci_bus 0000:02: resource 2 [mem 0x10000000-0x15ffffff pref]
[ 0.103597] pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
[ 0.103602] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
[ 0.103607] pci_bus 0000:03: resource 0 [io 0x3400-0x34ff]
[ 0.103611] pci_bus 0000:03: resource 1 [io 0x3800-0x38ff]
[ 0.103616] pci_bus 0000:03: resource 2 [mem 0x10000000-0x13ffffff pref]
[ 0.103621] pci_bus 0000:03: resource 3 [mem 0x18000000-0x1bffffff]
[ 0.103690] NET: Registered protocol family 2
[ 0.103801] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.104152] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.104241] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.104320] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.104324] TCP reno registered
[ 0.104332] UDP hash table entries: 128 (order: 0, 4096 bytes)
[ 0.104346] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
[ 0.104459] NET: Registered protocol family 1
[ 0.104555] pci 0000:01:00.0: Boot video device
[ 0.104569] PCI: CLS 32 bytes, default 64
[ 0.104663] Trying to unpack rootfs image as initramfs...
[ 0.619721] Freeing initrd memory: 9408k freed
[ 0.641014] audit: initializing netlink socket (disabled)
[ 0.641048] type=2000 audit(1338835836.640:1): initialized
[ 0.656200] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.658794] VFS: Disk quotas dquot_6.5.2
[ 0.658893] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.659764] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.660150] NTFS driver 2.1.29 [Flags: R/W].
[ 0.660552] aufs 2.1-standalone.tree-36-20110328
[ 0.660563] msgmni has been set to 493
[ 0.660894] alg: No test for stdrng (krng)
[ 0.661006] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.661013] io scheduler noop registered
[ 0.661016] io scheduler deadline registered
[ 0.661043] io scheduler cfq registered (default)
[ 0.662450] vesafb: framebuffer at 0xf0000000, mapped to 0xd0800000, using 3072k, total 16384k
[ 0.662457] vesafb: mode is 1024x768x16, linelength=2048, pages=1
[ 0.662461] vesafb: protected mode interface info at c000:da80
[ 0.662466] vesafb: pmi: set display start = c00cdac5, set palette = c00cdb4a
[ 0.662470] vesafb: pmi: ports = b4c3 b503 ba03 c003 c103 c403 c503 c603 c703 c803 c903 cc03 ce03 cf03 d003 d103 d203 d303 d403 d503 da03 ff03
[ 0.662497] vesafb: scrolling: redraw
[ 0.662504] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 0.691294] Console: switching to colour frame buffer device 128x48
[ 0.719848] fb0: VESA VGA frame buffer device
[ 0.719957] ERST: Table is not found!
[ 0.719977] isapnp: Scanning for PnP cards...
[ 1.030718] isapnp: No Plug & Play device found
[ 1.031019] Linux agpgart interface v0.103
[ 1.031220] agpgart-intel 0000:00:00.0: Intel 845G Chipset
[ 1.035295] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xec000000
[ 1.035424] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.036260] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
[ 1.036270] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
[ 1.036281] serial 0000:00:1f.6: PCI INT B disabled
[ 1.038249] brd: module loaded
[ 1.039215] loop: module loaded
[ 1.039237] Uniform Multi-Platform E-IDE driver
[ 1.039347] ide-cd driver 5.00
[ 1.039660] ata_piix 0000:00:1f.1: version 2.13
[ 1.039681] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[ 1.039939] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 1.039944] PCI: setting IRQ 11 as level-triggered
[ 1.039952] ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 1.040093] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.040255] scsi0 : ata_piix
[ 1.040412] scsi1 : ata_piix
[ 1.041376] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1840 irq 14
[ 1.041382] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1848 irq 15
[ 1.042167] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.042201] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.042263] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
[ 1.042277] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.042283] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.042373] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 1.042411] uhci_hcd 0000:00:1d.0: irq 10, io base 0x00001800
[ 1.042486] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.042492] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.042496] usb usb1: Product: UHCI Host Controller
[ 1.042500] usb usb1: Manufacturer: Linux 2.6.36-1-mepis-smp uhci_hcd
[ 1.042504] usb usb1: SerialNumber: 0000:00:1d.0
[ 1.042682] hub 1-0:1.0: USB hub found
[ 1.042691] hub 1-0:1.0: 2 ports detected
[ 1.043040] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 1.043049] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 1.043060] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.043066] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.043133] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 1.043165] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820
[ 1.043231] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.043237] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.043241] usb usb2: Product: UHCI Host Controller
[ 1.043245] usb usb2: Manufacturer: Linux 2.6.36-1-mepis-smp uhci_hcd
[ 1.043249] usb usb2: SerialNumber: 0000:00:1d.1
[ 1.043417] hub 2-0:1.0: USB hub found
[ 1.043426] hub 2-0:1.0: 2 ports detected
[ 1.043567] Initializing USB Mass Storage driver...
[ 1.043611] usbcore: registered new interface driver usb-storage
[ 1.043614] USB Mass Storage support registered.
[ 1.043639] usbcore: registered new interface driver ums-alauda
[ 1.043661] usbcore: registered new interface driver ums-cypress
[ 1.043684] usbcore: registered new interface driver ums-datafab
[ 1.043706] usbcore: registered new interface driver ums-freecom
[ 1.043726] usbcore: registered new interface driver ums-isd200
[ 1.043748] usbcore: registered new interface driver ums-jumpshot
[ 1.043771] usbcore: registered new interface driver ums-karma
[ 1.043794] usbcore: registered new interface driver ums-onetouch
[ 1.043822] usbcore: registered new interface driver ums-sddr09
[ 1.043845] usbcore: registered new interface driver ums-sddr55
[ 1.043868] usbcore: registered new interface driver ums-usbat
[ 1.043955] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.059211] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.059223] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.059447] mice: PS/2 mouse device common for all mice
[ 1.059619] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.059643] rtc0: alarms up to one month, y3k, 242 bytes nvram
[ 1.059667] cpuidle: using governor ladder
[ 1.059672] cpuidle: using governor menu
[ 1.059676] No iBFT detected.
[ 1.060264] TCP cubic registered
[ 1.060524] NET: Registered protocol family 10
[ 1.061195] lo: Disabled Privacy Extensions
[ 1.061573] Mobile IPv6
[ 1.061579] NET: Registered protocol family 17
[ 1.061588] Registering the dns_resolver key type
[ 1.061640] Using IPI No-Shortcut mode
[ 1.061804] PM: Resume from disk failed.
[ 1.061824] registered taskstats version 1
[ 1.062090] rtc_cmos 00:01: setting system clock to 2012-06-04 18:50:38 UTC (1338835838)
[ 1.083215] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.212684] ata2.00: ATAPI: HL-DT-STCD-RW/DVD-ROM GCC-4240N, D110, max UDMA/33
[ 1.212793] ata1.00: ATA-5: HITACHI_DK23EA-30, 00K4A0C1, max UDMA/100
[ 1.212800] ata1.00: 58605120 sectors, multi 16: LBA
[ 1.220379] ata1.00: configured for UDMA/100
[ 1.220581] scsi 0:0:0:0: Direct-Access ATA HITACHI_DK23EA-3 00K4 PQ: 0 ANSI: 5
[ 1.220860] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.221064] sd 0:0:0:0: [sda] 58605120 512-byte logical blocks: (30.0 GB/27.9 GiB)
[ 1.221165] sd 0:0:0:0: [sda] Write Protect is off
[ 1.221171] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.221214] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.228248] ata2.00: configured for UDMA/33
[ 1.256543] sda: sda1 sda2 sda3 < sda5 sda6 >
[ 1.257095] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.344838] scsi 1:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-4240N D110 PQ: 0 ANSI: 5
[ 1.352038] usb 1-1: new low speed USB device using uhci_hcd and address 2
[ 1.355941] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 1.355947] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.356163] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.356278] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.356363] Freeing unused kernel memory: 412k freed
[ 1.468338] <30>udev[56]: starting version 167
[ 1.527526] usb 1-1: New USB device found, idVendor=046d, idProduct=c05a
[ 1.527534] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.527540] usb 1-1: Product: USB Optical Mouse
[ 1.527544] usb 1-1: Manufacturer: Logitech
[ 1.865796] 3c59x 0000:02:01.0: PCI INT A -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
[ 1.865825] 3c59x: Donald Becker and others.
[ 1.865837] 0000:02:01.0: 3Com PCI 3c905C Tornado at d0b6a000.
[ 1.956099] Floppy drive(s): fd0 is 1.44M
[ 1.975996] FDC 0 is a National Semiconductor PC87306
[ 2.026383] usbcore: registered new interface driver hiddev
[ 2.040425] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0/input/input1
[ 2.040738] generic-usb 0003:046D:C05A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1/input0
[ 2.041154] usbcore: registered new interface driver usbhid
[ 2.041160] usbhid: USB HID core driver
[ 2.907101] EXT3-fs: barriers not enabled
[ 2.918331] kjournald starting. Commit interval 5 seconds
[ 2.918366] EXT3-fs (sda6): mounted filesystem with ordered data mode
[ 5.124513] <30>udev[285]: starting version 167
[ 5.859905] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 5.860001] ACPI: Lid Switch [LID]
[ 5.860198] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 5.860207] ACPI: Power Button [PWRB]
[ 5.860311] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
[ 5.860318] ACPI: Sleep Button [SLPB]
[ 5.860450] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 5.860457] ACPI: Power Button [PWRF]
[ 5.952880] ACPI: Battery Slot [BAT1] (battery present)
[ 5.953015] ACPI: AC Adapter [ACAD] (on-line)
[ 6.022350] ACPI: acpi_idle registered with cpuidle
[ 6.022445] Marking TSC unstable due to TSC halts in idle
[ 6.025661] Switching to clocksource acpi_pm
[ 6.178813] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 6.482707] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:00/LNXVIDEO:00/input/input6
[ 6.482880] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 6.493346] intel_rng: FWH not detected
[ 6.670688] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 6.722520] parport_pc 00:07: reported by Plug and Play ACPI
[ 6.722581] parport0: PC-style at 0x378, irq 7 [PCSPP]
[ 6.803195] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 7.076834] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x254ab1, caps: 0x804713/0x0/0x0
[ 7.150230] [drm] Initialized drm 1.1.0 20060810
[ 7.163099] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[ 7.220848] yenta_cardbus 0000:02:04.0: CardBus bridge found [1028:00f3]
[ 7.220877] yenta_cardbus 0000:02:04.0: O2: enabling read prefetch/write burst
[ 7.348801] yenta_cardbus 0000:02:04.0: ISA IRQ mask 0x0038, PCI irq 10
[ 7.348810] yenta_cardbus 0000:02:04.0: Socket status: 30000821
[ 7.348818] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #02 to #06
[ 7.348839] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [io 0x3000-0x3fff]
[ 7.348846] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3000-0x3fff: excluding 0x3000-0x307f 0x3400-0x34ff 0x3800-0x38ff
[ 7.355983] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [mem 0xe8000000-0xe80fffff]
[ 7.355990] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe8000000-0xe80fffff: excluding 0xe8000000-0xe800ffff
[ 7.356038] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [mem 0x10000000-0x15ffffff pref]
[ 7.356044] pcmcia_socket pcmcia_socket0: cs: memory probe 0x10000000-0x15ffffff: excluding 0x10000000-0x15ffffff
[ 8.248057] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
[ 8.248122] pci 0000:03:00.0: reg 10: [mem 0x00000000-0x0000ffff]
[ 8.248251] pci 0000:03:00.0: BAR 0: assigned [mem 0x18000000-0x1800ffff]
[ 8.248262] pci 0000:03:00.0: BAR 0: set to [mem 0x18000000-0x1800ffff] (PCI address [0x18000000-0x1800ffff]
[ 8.248934] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x37f
[ 8.251088] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7
[ 8.252804] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 8.253620] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 8.254486] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcffff 0xdc000-0xfffff
[ 8.254598] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
[ 8.254708] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: clean.
[ 8.254823] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 8.953886] cfg80211: Calling CRDA to update world regulatory domain
[ 9.194638] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
[ 9.194668] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 9.333417] ath5k 0000:03:00.0: enabling device (0000 -> 0002)
[ 9.333439] ath5k 0000:03:00.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
[ 9.334028] ath5k 0000:03:00.0: registered as 'phy0'
[ 9.924491] ath: EEPROM regdomain: 0x10
[ 9.924496] ath: EEPROM indicates we should expect a direct regpair map
[ 9.924502] ath: Country alpha2 being used: CO
[ 9.924505] ath: Regpair used: 0x10
[ 9.988067] intel8x0_measure_ac97_clock: measured 53369 usecs (2564 samples)
[ 9.988074] intel8x0: clocking to 48000
[ 9.989177] Intel ICH Modem 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
[ 9.989211] Intel ICH Modem 0000:00:1f.6: setting latency timer to 64
[ 10.017607] phy0: Selected rate control algorithm 'minstrel_ht'
[ 10.018856] cfg80211: Calling CRDA for country: CO
[ 10.019624] ath5k phy0: Atheros AR2414 chip found (MAC: 0x79, PHY: 0x45)
[ 10.092096] MC'97 1 converters and GPIO not ready (0xff00)
[ 12.028655] Adding 537596k swap on /dev/sda5. Priority:1 extents:1 across:537596k
[ 12.339177] EXT3-fs (sda6): using internal journal
[ 13.762559] fuse init (API version 7.15)
[ 14.628987] eth0: setting full-duplex.
[ 16.308757] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input8
[ 18.251824] lp0: using parport0 (interrupt-driven).
[ 18.671148] ppdev: user-space parallel port driver