topic title: xdelta3 patch. Testers needed.
Posts: 516
oldhoghead
Site Admin
Joined: 01 Oct 2007
#16
Downloaded the full 386, then xdelta to RC1, used new_usb.sh to install to thumb drive, wow, very fast. Booted in default to 1024X768 as did autores 1 and autores2, after setting up persistant root rebooted ,this boot is modeset 0. Need more info let me know. I have another newer laptop I'm going to try later.

Code: Select all

$ inxi -F
System:    Host: antiX1 Kernel: 3.6.11-antix.1-486-smp i686 (32 bit) 
           Desktop: Fluxbox 1.3.2 Distro: antiX-13-rc1_386-full Luddite 4 May 2013
Machine:   System: Dell product: Inspiron 700m version: -1
           Mobo: DELL SYSTEM model: 0D9593 Bios: Phoenix version: A07 date: 03/20/06
CPU:       Single core Intel Pentium M (-UP-) cache: 2048 KB flags: (sse sse2) clocked at 1800.00 MHz 
Graphics:  Card: Intel 82852/855GM Integrated Graphics Device 
           X.Org: 1.12.4 drivers: intel (unloaded: fbdev,vesa) Resolution: 1280x800@60.0hz 
           GLX Renderer: N/A GLX Version: N/A
Audio:     Card: Intel 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller driver: snd_intel8x0 
           Sound: Advanced Linux Sound Architecture ver: 1.0.25
Network:   Card-1: Broadcom BCM4401-B0 100Base-TX driver: b44 
           IF: eth0 state: up speed: 100 Mbps duplex: full mac: 00:0f:1f:b1:7f:1c
           Card-2: Intel PRO/Wireless 2915ABG [Calexico2] Network Connection 
           IF: N/A state: N/A mac: N/A
Drives:    HDD Total Size: 82.1GB (0.9% used) 1: id: /dev/sda model: FUJITSU_MHT2080A size: 80.0GB 
           2: USB id: /dev/sdb model: U3_Cruzer_Micro size: 2.0GB 
Partition: ID: / size: 784M used: 7.8M (1%) fs: rootfs ID: /home size: 248M used: 13M (6%) fs: ext4 
           ID: swap-1 size: 4.34GB used: 0.00GB (0%) fs: swap 
Sensors:   System Temperatures: cpu: 45.0C mobo: 38.0C 
           Fan Speeds (in rpm): cpu: N/A 
Info:      Processes: 87 Uptime: 4 min Memory: 161.8/991.6MB Client: Shell (bash) inxi: 1.8.45 
demo@antiX1:~
$ inxi -G
Graphics:  Card: Intel 82852/855GM Integrated Graphics Device 
           X.Org: 1.12.4 drivers: intel (unloaded: fbdev,vesa) Resolution: 1280x800@60.0hz 
           GLX Renderer: N/A GLX Version: N/A
edit: btw on a reboot, F7 shows DPI, I don't have the F7save option, but I did format the usb using gparted, then used the new_usb.sh script Dict is correct also. Autotime zone defaults to 1hr ahead of my actual timezone.

cheers,
ohh
nadir
Posts 0
nadir
#17
F4 has autoload option that should autoload any necessary drivers eg sd cards.
That didn't work for me, but i am not sure if it was supposed to work in my case.

Else i got intel, and it always works out of box.
Posts: 630
Eino
Joined: 12 Oct 2012
#18
the F4 feature autoload, mounted the SD card with no problem.
On a Acer Netbook.
Posts: 765
rust collector
Joined: 27 Dec 2011
#19
yes it does, on acer netbook, on both card readers
nadir
Posts 0
nadir
#20
nadir wrote:
F4 has autoload option that should autoload any necessary drivers eg sd cards.
That didn't work for me, but i am not sure if it was supposed to work in my case.

Else i got intel, and it always works out of box.
My fault. I missed some info BitJam gave me.
Simply using
load=ums-realtek
as boot parameter made it boot.
Posts: 4,164
rokytnji
Joined: 20 Feb 2009
#21
Fkey modeset-=0 Acer Aspire 5534 Laptop.

Video Specs

Code: Select all

$ inxi -G
Graphics:  Card: Advanced Micro Devices [AMD] nee ATI RS780M/RS780MN [Mobility Radeon HD 3200 Graphics] 
           X.Org: 1.12.4 drivers: ati,radeon (unloaded: fbdev,vesa) Resolution: 1366x768@60.0hz 
           GLX Renderer: N/A GLX Version: N/A
Full readout

Code: Select all

demo@antiX1:~
$ inxi -b
System:    Host: antiX1 Kernel: 3.7.10-antix.2-amd64-smp x86_64 (64 bit) 
           Desktop: IceWM 1.3.7 Distro: antiX-13-rc1_x64-full Luddite 3 May 2013
Machine:   Mobo: Acer model: Aspire 5534 version: V1.10 Bios: Acer version: V1.10 date: 08/26/2009
CPU:       Dual core AMD Athlon X2 L310 (-MCP-) clocked at 1196.971 MHz 
Graphics:  Card: Advanced Micro Devices [AMD] nee ATI RS780M/RS780MN [Mobility Radeon HD 3200 Graphics] 
           X.Org: 1.12.4 drivers: ati,radeon (unloaded: fbdev,vesa) Resolution: 1366x768@60.0hz 
           GLX Renderer: N/A GLX Version: N/A
Network:   Card-1: Atheros AR928X Wireless Network Adapter (PCI-Express) driver: ath9k 
           Card-2: Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller driver: r8169 
Drives:    HDD Total Size: 252.1GB (0.3% used)
Info:      Processes: 113 Uptime: 3 min Memory: 253.3/3703.8MB Client: Shell (bash) inxi: 1.8.45
Good thing I held off on the install and went to Fiesta West Texas on the weekend instead. Got back to see this delta patch uploaded. Off topic a little.
When I went to use the installer on beta 3 before RC1. All the installer could see to install to was my pendrive and not the internal sata drive on the IBM M57 dual core
tower I have so I blew off installing. Trying to unmount internal sata drive in gparted (using the installer button for gparted) got me no where on un mounting internal sata drive. It was late so I blew it off for later. Any hows. Just running live usb for now on this laptop. I gotta do some backup before installing over beta 1 base iso installation on

Code: Select all

root@antiX1:/home/demo# blkid
/dev/loop0: TYPE="squashfs" 
/dev/sda1: LABEL="PQSERVICE" UUID="84C0247FC0247996" TYPE="ntfs" 
/dev/sda2: LABEL="SYSTEM RESERVED" UUID="9C2425202424FF40" TYPE="ntfs" 
/dev/sda3: LABEL="Acer" UUID="6AC2CA02C2C9D28D" TYPE="ntfs" 
/dev/sda5: UUID="26a54718-3581-4c8b-958a-a03d4ce2b96f" TYPE="swap" 
/dev/sda6: UUID="36c9c5bd-8611-475c-91ed-b13b8ecfe729" TYPE="ext4" 
/dev/sda7: LABEL="/home" UUID="55421c6b-4f54-41a2-979e-82ca2b7f2b1f" UUID_SUB="4a16b4e6-1f25-4024-9ebc-a6ff6b28c584" TYPE="btrfs" 
/dev/sdb1: UUID="CEAC-FE9E" TYPE="vfat"


This laptop dualbooter with Windows 7 and AntiX. It has a recovery partition along with everything else. /dev/sda7 is /home. Funny thing. I a going to check now.

post28986.html#p28986

Yep, beta 3 saw my internal sata partitions as sdb instead of sda like RC1 does. See. I was not hallucinating on magic mushrooms when I ran the installer and could not install that evening. Fiesta West Texas (Cinco de Mayo) was a blast by the way.
Posts: 4,164
rokytnji
Joined: 20 Feb 2009
#22
modeset=1. By the way BitJam. I am taking out the lean bootcode in live boot if that makes a difference.

Code: Select all

$ inxi -G
Graphics:  Card: Advanced Micro Devices [AMD] nee ATI RS780M/RS780MN [Mobility Radeon HD 3200 Graphics] 
           X.Org: 1.12.4 drivers: ati,radeon (unloaded: fbdev,vesa) Resolution: 1366x768@60.0hz 
           GLX Renderer: N/A GLX Version: N/A
Posts: 4,164
rokytnji
Joined: 20 Feb 2009
#23
modeset=2

Code: Select all

demo@antiX1:~
$ inxi -G
Graphics:  Card: Advanced Micro Devices [AMD] nee ATI RS780M/RS780MN [Mobility Radeon HD 3200 Graphics] 
           X.Org: 1.12.4 drivers: ati,radeon (unloaded: fbdev,vesa) Resolution: 1366x768@60.0hz 
           GLX Renderer: N/A GLX Version: N/A
Posts: 4,164
rokytnji
Joined: 20 Feb 2009
#24
Moved out to the shop. AntiX testing is installed on this also along side Ubuntu 10.04. Notice the difference in blkid readouts. sdb vs sda on laptop.

modeset=0

Code: Select all

demo@antiX1:~
$ inxi -Fxz
System:    Host: antiX1 Kernel: 3.7.10-antix.2-amd64-smp x86_64 (64 bit, gcc: 4.7.2) 
           Desktop: IceWM 1.3.7 Distro: antiX-13-rc1_x64-full Luddite 3 May 2013
Machine:   System: LENOVO product: 6075BHU version: ThinkCentre M57
           Mobo: LENOVO model: LENOVO Bios: LENOVO version: 2RKT41AUS date: 03/20/2008
CPU:       Dual core Intel Pentium Dual CPU E2160 (-MCP-) cache: 1024 KB flags: (lm nx sse sse2 sse3 ssse3) bmips: 7182.2 
           Clock Speeds: 1: 1200.00 MHz 2: 1200.00 MHz
Graphics:  Card: Intel 82Q35 Express Integrated Graphics Controller bus-ID: 00:02.0 
           X.Org: 1.12.4 drivers: intel (unloaded: fbdev,vesa) Resolution: 1600x900@60.0hz 
           GLX Renderer: N/A GLX Version: N/A Direct Rendering: N/A
Audio:     Card: Intel 82801I (ICH9 Family) HD Audio Controller driver: snd_hda_intel bus-ID: 00:1b.0 
           Sound: Advanced Linux Sound Architecture ver: k3.7.10-antix.2-amd64-smp
Network:   Card-1: Ralink RT2561/RT61 802.11g PCI driver: rt61pci ver: 2.3.0 bus-ID: 11:0c.0
           IF: wlan0 state: up mac: <filter>
           Card-2: Intel 82566DM-2 Gigabit Network Connection driver: e1000e ver: 2.1.4-k port: 1820 bus-ID: 00:19.0
           IF: eth0 state: down mac: <filter>
Drives:    HDD Total Size: 82.0GB (0.9% used) 1: USB id: /dev/sda model: DataTraveler_2.0 size: 2.0GB 
           2: id: /dev/sdb model: ST380815AS size: 80.0GB 
Partition: ID: / size: 1.6G used: 20M (2%) fs: rootfs ID: swap-1 size: 3.27GB used: 0.00GB (0%) fs: swap 
Sensors:   System Temperatures: cpu: 43.0C mobo: N/A 
           Fan Speeds (in rpm): cpu: N/A 
Info:      Processes: 99 Uptime: 5 min Memory: 240.3/1981.2MB Runlevel: 5 Gcc sys: 4.7.2 
           Client: Shell (bash 4.2.37) inxi: 1.8.45 
demo@antiX1:~
$ inxi -G
Graphics:  Card: Intel 82Q35 Express Integrated Graphics Controller 
           X.Org: 1.12.4 drivers: intel (unloaded: fbdev,vesa) Resolution: 1600x900@60.0hz 
           GLX Renderer: N/A GLX Version: N/A
demo@antiX1:~
$ sux
Password: 
xauth:  file /root/.Xauthority does not exist
bash: cannot set terminal process group (-1): Inappropriate ioctl for device
bash: no job control in this shell
root@antiX1:/home/demo# blkid
/dev/loop0: TYPE="squashfs" 
/dev/sda1: UUID="CEAC-FE9E" TYPE="vfat" 
/dev/sdb1: UUID="343942EB578098A9" TYPE="ntfs" 
/dev/sdb3: UUID="676d70d7-1c41-449b-be0f-2e04df874d86" TYPE="ext4" 
/dev/sdb5: UUID="a70b8580-b61d-4732-8109-b6f883ab58de" TYPE="swap" 
/dev/sdb6: UUID="454f0f9b-3885-4a59-a3d8-eefe9bef04e6" TYPE="ext4" 
/dev/sdb7: LABEL="/" UUID="69f5ae2f-b286-455a-ab50-6440b01a21f4" TYPE="ext4"
Weird but true.

edit1: modeset=1

Code: Select all

demo@antiX1:~
$ inxi -G
Graphics:  Card: Intel 82Q35 Express Integrated Graphics Controller 
           X.Org: 1.12.4 drivers: intel (unloaded: fbdev,vesa) Resolution: 1600x900@60.0hz 
           GLX Renderer: N/A GLX Version: N/A
demo@antiX1:~
edit2: modeset=2

Code: Select all

emo@antiX1:~
$ inxi -G
Graphics:  Card: Intel 82Q35 Express Integrated Graphics Controller 
           X.Org: 1.12.4 drivers: intel (unloaded: fbdev,vesa) Resolution: 1280x1024@60.0hz 
           GLX Renderer: N/A GLX Version: N/A
demo@antiX1:~
$ cat /etc/X11/xorg.conf
Section"Monitor"
    Identifier"Monitor0"
    Option"DPMS""true"
    HorizSync    30-75
    VertRefresh  55-70 
EndSection

Section"Device"
    Identifier"Device0"
EndSection

Section"Screen"
    Identifier"Screen0"
    Monitor"Monitor0"
    Device "Device0"

    SubSection"Display"
        Modes"1280x1024""1024x768""800x600"
    EndSubSection
EndSection
Edit3: The installer is now letting me install full iso to /dev/sdb instead of only giving me /dev/sda as a option like last friday.
Posts: 1,028
SamK
Joined: 21 Aug 2011
#25
Having some difficultry applying the patch.

Got antiX-13-beta3_386-full.iso and b3_to_RC1_386_delta. md5sums checkout OK for each of them.

Burned ISO to CDROM which boots OK.

Knowing that the unpatched ISO works OK, then tried to apply patch prior to burning the resulting ISO. Each time a one-word message is obtained"killed". An ISO is always produced but it is around 300MB in size.

Command issued

Code: Select all

xdelta3 -d -s antiX-13-beta3_386-full.iso b3_to_RC1_386_delta antiX-13-RC1_386-full.iso
Posts: 1,028
SamK
Joined: 21 Aug 2011
#26
SamK wrote:Having some difficultry applying the patch.

Got antiX-13-beta3_386-full.iso and b3_to_RC1_386_delta. md5sums checkout OK for each of them.

Burned ISO to CDROM which boots OK.

Knowing that the unpatched ISO works OK, then tried to apply patch prior to burning the resulting ISO. Each time a one-word message is obtained"killed". An ISO is always produced but it is around 300MB in size.

Command issued

Code: Select all

xdelta3 -d -s antiX-13-beta3_386-full.iso b3_to_RC1_386_delta antiX-13-RC1_386-full.iso
Returned to investigate this the following day. This time the above command completed without an error and produced a working ISO. No idea what caused the difference.
Posts: 1,028
SamK
Joined: 21 Aug 2011
#27
Feedback re F5 for various graphics adaptors.

Boot media=CDROM
OS Ver=antiX-13-RC1_386-full.iso
Results extracted from inxi -G

Code: Select all

Graphics:  Card: Silicon Integrated Systems [SiS] 65x/M650/740 PCI/AGP VGA Display Adapter 
           X.Org: 1.12.4 drivers: sis (unloaded: fbdev,vesa) Resolution: 1024x768@60.0hz 
           GLX Renderer: N/A GLX Version: N/A
Resolution
Default      1024x768@60.0hz
auto res 1   1024x768@60.0hz
auto res 2   No display obtained

Code: Select all

Graphics:  Card: NVIDIA NV11 [GeForce2 MX/MX 400] 
           X.Org: 1.12.4 drivers: vesa,nouveau (unloaded: fbdev) Resolution: 1024x768@0.0hz 
           GLX Renderer: N/A GLX Version: N/A
Resolution
Default      1024x768@0.0hz
auto res 1   1024x768@0.0hz
auto res 2   1024x768@0.0hz
drivers: nouveau (unloaded: fbdev,vesa)
modeset 0    1024x768@60.0hz
modeset 1    1024x768@60.0hz 
modeset 2    1024x768@60.0hz

Code: Select all

Graphics:  Card: Matrox Systems MGA G100 [Productiva] AGP 
           X.Org: 1.12.4 drivers: mga (unloaded: fbdev,vesa) Resolution: 1024x768@60.0hz 
           GLX Renderer: N/A GLX Version: N/A
Resolution
Default      No display obtained
auto res 1   1024x768@0.0hz
auto res 2   1024x768@0.0hz

Code: Select all

Graphics:  Card: Advanced Micro Devices [AMD] nee ATI 3D Rage Pro AGP 1X/2X 
           X.Org: 1.12.4 drivers: ati,mach64 (unloaded: fbdev,vesa) Resolution: 1024x768@60.0hz 
           GLX Renderer: N/A GLX Version: N/A
Resolution
Default      1024x768@0.0hz
auto res 1   1024x768@0.0hz
auto res 2   No display obtained

Code: Select all

Graphics:  Card: NVIDIA NV34 [GeForce FX 5200] 
           X.Org: 1.12.4 drivers: vesa,nouveau (unloaded: fbdev) Resolution: 1024x768@61.0hz 
           GLX Renderer: N/A GLX Version: N/A
Resolution
Default      1024x768@61.0hz
auto res 1   1280x1024@61.0hz (Distorted display - screen hardware settings for geometry, size, position)
auto res 2   1024x1024@61.0hz (Distorted display - screen hardware settings for geometry, size, position)
drivers: nouveau (unloaded: fbdev,vesa)
modeset 0    1024x768@60.0hz
modeset 1    1024x768@60.0hz 
modeset 2    1024x768@60.0hz

Code: Select all

Graphics:  Card: Silicon Integrated Systems [SiS] 630/730 PCI/AGP VGA Display Adapter 
           X.Org: 1.12.4 drivers: sis (unloaded: fbdev,vesa) Resolution: 1024x768@60.0hz 
           GLX Renderer: N/A GLX Version: N/A
Resolution
Default      1024x768@60.0hz
auto res 1   1024x768@70.0hz
auto res 2   1024x768@70.0hz
Posts: 1,028
SamK
Joined: 21 Aug 2011
#28
When shutting down live CD session a message is obtained to remove CD. The tray is not automatically ejected and cannot be released manually. The system must be powered down and restarted to remove the CDROM.
Posts: 1,028
SamK
Joined: 21 Aug 2011
#29
All instances tested using ROX-IceWM produce the old"ghost window" issue. Previously addressed by post25928.html?hilit=ghost%20window#p25928
Posts: 2,238
dolphin_oracle
Joined: 16 Dec 2007
#30
I confirm the"ghost window" in ROX-Icewm.