I recently installed antiX 7.2 on the above machine, purchasing it for around one hundred dollars in used condition. I thought I would detail my experiences here to aid anyone considering something similar for antiX. Shuttles are SFF (Small Form Factor) computers and the SB61G2 is about the size of a small toaster.
Although I have antiX installed on three other computers, the most used was a P3 1 GHz with 192MB of RAM. Performance was great but the browsers were slow and I grew tired of the delay. I decided to upgrade processor and memory to check out the difference and thus purchased the Shuttle.
The machine is a Pentium 4 (Northwood core) 2.6 GHz with hyper threading. Also a 160GB Maxtor hard drive, Sony DVD-RW (DRU-5), 1 GB DDR Ram, and integrated audio and video. The audio is AC97...Realtek ALC650F. The integrated video is Intel Extreme Graphics 2. The Shuttle had one open AGP slot and one open PCI slot.
I scrounged through my old parts pile and found an old SoundBlaster audio card and a GeForce FX 5200 128MB video card. I kept them waiting in the wings for any audio or video problems.
antiX installed fine but even forcing 1024x768 at Grub gave me 800x600. I could force it to 1024 after antiX was up but on reboot it would revert to 800x600 again. Wanting a little more oomph on the video anyway, I finally installed the GeForce card and the video problem was solved.
The sound was sporadic as well. Sound worked on initial installation but only the left channel (speaker) worked. Next boot both speakers worked fine. Next boot no audio at all. Used alsa config and mixer with mixed results. Finally defaulted to the SoundBlaster card for solid audio.
Now that I'm up and running performance has been great. From the press of the start button to the slim log-on screen is 50 seconds. So even taking the time to type in username and password I'm booted up and running in under a minute. Iceweasel takes 6 seconds to start. Both Iceweasel and Opera are nearly instantaneous to react. I rarely use even 50% of the processor and most of the time memory use is 15% or below. I haven't tried leaving iceweasel up and running. With my old P3 computer memory use would slowly increase in that scenario until I was close to maxxing memory.
I love antiX but the smile on my face is even larger with the performance I'm enjoying now. antiX is a life saver for older P3 era machines but if you want some fun put it on something faster!
topic title: Shuttle SB61G2
-
impuwatPosts: 319
- Joined: 13 Sep 2007
-
DJiNNPosts: 316
- Joined: 26 Oct 2007
#2
I have noticed the memory thing though, and when left on for any length of time (We're talking days here, if not weeks) especially using IceWeasel, the memory does creep up and doesn't seem to drop. Eventually i do have to reboot to clear it and kind of"Refresh". I've had to do this with almost ALL of the Linx distros that i've run though, whatever machine i run them on, so it's no biggie. __{{emoticon}}__
Definitely worth a try for those thinking of putting antiX on a faster (more modern) machine. Strangely enough i use Shuttles for my music work here, but i've never put antiX on them. Glad to hear that it's working solid, but then antiX does"Rock"! __{{emoticon}}__
I've also been running antiX on several machines, one of which (for at least the last 6-8 months) is a P4 Northwood, 2.6ghz with a 160gb HD & 1gb ram. It's definitely snappy without a doubt, and apart from some very strange problems with"Xorg" becoming"Unexecutable" all of a sudden (For no apparent reason that i know of) and prompting a"re-install", it's been great.impuwat wrote: Now that I'm up and running performance has been great. From the press of the start button to the slim log-on screen is 50 seconds. So even taking the time to type in username and password I'm booted up and running in under a minute. Iceweasel takes 6 seconds to start. Both Iceweasel and Opera are nearly instantaneous to react. I rarely use even 50% of the processor and most of the time memory use is 15% or below. I haven't tried leaving iceweasel up and running. With my old P3 computer memory use would slowly increase in that scenario until I was close to maxxing memory.
I have noticed the memory thing though, and when left on for any length of time (We're talking days here, if not weeks) especially using IceWeasel, the memory does creep up and doesn't seem to drop. Eventually i do have to reboot to clear it and kind of"Refresh". I've had to do this with almost ALL of the Linx distros that i've run though, whatever machine i run them on, so it's no biggie. __{{emoticon}}__
Definitely worth a try for those thinking of putting antiX on a faster (more modern) machine. Strangely enough i use Shuttles for my music work here, but i've never put antiX on them. Glad to hear that it's working solid, but then antiX does"Rock"! __{{emoticon}}__
-
impuwatPosts: 319
- Joined: 13 Sep 2007
#3
Thanks for the comments. Hopefully I won't experience the Xorg problem you've experienced but if I do I will let you know and we can compare notes.
The memory leak is annoying but I don't leave computers on for any length of time anymore. Trying to be a little"greener" __{{emoticon}}__ From what you are saying...sounds like a kernel glitch.
Shuttle's seem like perfect companions to antiX. Small size, efficient energy use, and well designed.
The memory leak is annoying but I don't leave computers on for any length of time anymore. Trying to be a little"greener" __{{emoticon}}__ From what you are saying...sounds like a kernel glitch.
Shuttle's seem like perfect companions to antiX. Small size, efficient energy use, and well designed.
-
DJiNNPosts: 316
- Joined: 26 Oct 2007
#4
Thanks for the reply impuwat. __{{emoticon}}__ I can't believe that it's happened again, just a few days after i've re-installed antiX!!! __{{emoticon}}__
I just can't get X to start. I suppose i could just re-install Xorg but as i'm not 100% sure of a:) what caused the problem in the first place & b:) what i'm doing re: Xorg, it seems a bit foolhardy. At the moment i'm having to use Zenwalk (Which i've also got installed on this machine) to be able to use the machine.
If anyone on here has any suggestions i'd be glad to hear them. __{{emoticon}}__ This is the 3rd time that it's happened, in about the same amount of weeks.
I just can't get X to start. I suppose i could just re-install Xorg but as i'm not 100% sure of a:) what caused the problem in the first place & b:) what i'm doing re: Xorg, it seems a bit foolhardy. At the moment i'm having to use Zenwalk (Which i've also got installed on this machine) to be able to use the machine.
If anyone on here has any suggestions i'd be glad to hear them. __{{emoticon}}__ This is the 3rd time that it's happened, in about the same amount of weeks.
-
anticapitalista
Posts: 5,955
- Site Admin
- Joined: 11 Sep 2007
#5
DjiNN,
That's bad news and no-one else has reported it (yet).
Are there any messages in /var/log that give any clue as to why this is happening?
Does upgrading generally from the default or from sid/unstable 'solve' the problem?
That's bad news and no-one else has reported it (yet).
Are there any messages in /var/log that give any clue as to why this is happening?
Does upgrading generally from the default or from sid/unstable 'solve' the problem?
-
DJiNNPosts: 316
- Joined: 26 Oct 2007
#6
Hi anti, thanks for the reply.
Unfortunately there are some problems (Well, many actually) that are just beyond me, and i feel that this is one of them. It'll probably be better to just re-install again, but as i mentioned earlier, i feel that i really need to find out"Why" it's happening so that it doesn't get repeated.
I'm not running sid/unstable on this machine, just testing, although i have used"Debian Experimental" to grab xcompmgr, and i could have left that enable in the sources.list... perhaps that could be a part of the problem?
I've had a look at the xorg.0.log (is that the right name?) in /var/log and have put a part of it below, just in case you can see something. I've cut it short because it's quite long, and most of it is taken up with the same line about"Open ACPI failed (/var/run/acpid.socket) (Connection refused)".
Can you see any obvious things?
Thanks anti, appreciate the help and advice.
Unfortunately there are some problems (Well, many actually) that are just beyond me, and i feel that this is one of them. It'll probably be better to just re-install again, but as i mentioned earlier, i feel that i really need to find out"Why" it's happening so that it doesn't get repeated.
I'm not running sid/unstable on this machine, just testing, although i have used"Debian Experimental" to grab xcompmgr, and i could have left that enable in the sources.list... perhaps that could be a part of the problem?
I've had a look at the xorg.0.log (is that the right name?) in /var/log and have put a part of it below, just in case you can see something. I've cut it short because it's quite long, and most of it is taken up with the same line about"Open ACPI failed (/var/run/acpid.socket) (Connection refused)".
Can you see any obvious things?
Thanks anti, appreciate the help and advice.
Code: Select all
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the"xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.4.0.90
Release Date: 5 September 2007
X Protocol Version 11, Revision 0
Build Operating System: Linux Debian (xorg-server 2:1.4.1~git20080131-4)
Current Operating System: Linux Lohrin 2.6.22-1-mepis-smp #1 SMP PREEMPT Mon Feb 18 21:44:02 EST 2008 i686
Build Date: 29 April 2008 08:24:00PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file:"/var/log/Xorg.0.log", Time: Wed Jun 18 15:18:16 2008
(==) Using config file:"/etc/X11/xorg.conf"
(==) ServerLayout"XFree86 Configured"
(**) |-->Screen"Screen0" (0)
(**) | |-->Monitor"Monitor0"
(**) | |-->Device"Card0"
(**) |-->Input Device"Keyboard0"
(**) |-->Input Device"PS/2 Mouse"
(**) Option"AllowMouseOpenFail""true"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory"/usr/share/fonts/truetype/arphic" does not exist.
Entry deleted from font path.
(WW) The directory"/usr/share/fonts/truetype/kochi" does not exist.
Entry deleted from font path.
(WW) The directory"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
Entry deleted from font path.
(==) Including the default font path /usr/share/fonts/X11/misc,/usr/share/fonts/X11/cyrillic,/usr/share/fonts/X11/100dpi/:unscaled,/usr/share/fonts/X11/75dpi/:unscaled,/usr/share/fonts/X11/Type1,/usr/share/fonts/X11/100dpi,/usr/share/fonts/X11/75dpi,/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType.
(**) FontPath set to:
/usr/share/fonts/X11/100dpi:unscaled,
/usr/share/fonts/X11/misc:unscaled,
/usr/share/fonts/truetype/freefont,
/usr/share/fonts/truetype/ttf-bitstream-vera,
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/cyrillic,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType
(==) RgbPath set to"/etc/X11/rgb"
(==) ModulePath set to"/usr/lib/xorg/modules"
(**) Extension"Composite" is enabled
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81d9220
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule:"pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(++) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,2570 card 103c,12bc rev 02 class 06,00,00 hdr 00
(II) PCI: 00:02:0: chip 8086,2572 card 103c,12bc rev 02 class 03,00,00 hdr 00
(II) PCI: 00:1d:0: chip 8086,24d2 card 103c,12bc rev 02 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,24d4 card 103c,12bc rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,24d7 card 103c,12bc rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,24dd card 103c,12bc rev 02 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev c2 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,24d0 card 0000,0000 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,24db card 103c,12bc rev 02 class 01,01,8a hdr 00
(II) PCI: 00:1f:2: chip 8086,24d1 card 103c,12bc rev 02 class 01,01,8f hdr 00
(II) PCI: 00:1f:3: chip 8086,24d3 card 103c,12bc rev 02 class 0c,05,00 hdr 00
(II) PCI: 00:1f:5: chip 8086,24d5 card 103c,12bc rev 02 class 04,01,00 hdr 00
(II) PCI: 05:02:0: chip 14e4,1696 card 103c,12bc rev 03 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,5), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 5: bridge is at (0:30:0), (0,5,5), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 5 non-prefetchable memory range:
[0] -1 0 0xfc500000 - 0xfc7fffff (0x300000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(0:2:0) Intel Corporation 82865G Integrated Graphics Controller rev 2, Mem @ 0xf0000000/27, 0xfc400000/19, I/O @ 0x14e0/3
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xf8000000 from 0xfbffffff to 0xf7ffffff
(II) Active PCI resource ranges:
[0] -1 0 0xfc500000 - 0xfc50ffff (0x10000) MX[B]
[1] -1 0 0xfc480600 - 0xfc4806ff (0x100) MX[B]
[2] -1 0 0xfc480400 - 0xfc4805ff (0x200) MX[B]
[3] -1 0 0x50000000 - 0x500003ff (0x400) MX[B]
[4] -1 0 0xfc480000 - 0xfc4803ff (0x400) MX[B]
[5] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
[6] -1 0 0xfc400000 - 0xfc47ffff (0x80000) MX[B](B)
[7] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
[8] -1 0 0x00001400 - 0x0000143f (0x40) IX[B]
[9] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]
[10] -1 0 0x0000fc00 - 0x0000fc1f (0x20) IX[B]
[11] -1 0 0x000014d0 - 0x000014df (0x10) IX[B]
[12] -1 0 0x00001814 - 0x00001817 (0x4) IX[B]
[13] -1 0 0x00001800 - 0x00001807 (0x8) IX[B]
[14] -1 0 0x00001810 - 0x00001813 (0x4) IX[B]
[15] -1 0 0x000014f8 - 0x000014ff (0x8) IX[B]
[16] -1 0 0x000014c0 - 0x000014cf (0x10) IX[B]
[17] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
[18] -1 0 0x00000170 - 0x00000177 (0x8) IX[B]
[19] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
[20] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[21] -1 0 0x00001480 - 0x0000149f (0x20) IX[B]
[22] -1 0 0x00001460 - 0x0000147f (0x20) IX[B]
[23] -1 0 0x00001440 - 0x0000145f (0x20) IX[B]
[24] -1 0 0x000014e0 - 0x000014e7 (0x8) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xfc500000 - 0xfc50ffff (0x10000) MX[B]
[1] -1 0 0xfc480600 - 0xfc4806ff (0x100) MX[B]
[2] -1 0 0xfc480400 - 0xfc4805ff (0x200) MX[B]
[3] -1 0 0x50000000 - 0x500003ff (0x400) MX[B]
[4] -1 0 0xfc480000 - 0xfc4803ff (0x400) MX[B]
[5] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
[6] -1 0 0xfc400000 - 0xfc47ffff (0x80000) MX[B](B)
[7] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
[8] -1 0 0x00001400 - 0x0000143f (0x40) IX[B]
[9] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]
[10] -1 0 0x0000fc00 - 0x0000fc1f (0x20) IX[B]
[11] -1 0 0x000014d0 - 0x000014df (0x10) IX[B]
[12] -1 0 0x00001814 - 0x00001817 (0x4) IX[B]
[13] -1 0 0x00001800 - 0x00001807 (0x8) IX[B]
[14] -1 0 0x00001810 - 0x00001813 (0x4) IX[B]
[15] -1 0 0x000014f8 - 0x000014ff (0x8) IX[B]
[16] -1 0 0x000014c0 - 0x000014cf (0x10) IX[B]
[17] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
[18] -1 0 0x00000170 - 0x00000177 (0x8) IX[B]
[19] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
[20] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[21] -1 0 0x00001480 - 0x0000149f (0x20) IX[B]
[22] -1 0 0x00001460 - 0x0000147f (0x20) IX[B]
[23] -1 0 0x00001440 - 0x0000145f (0x20) IX[B]
[24] -1 0 0x000014e0 - 0x000014e7 (0x8) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xfc500000 - 0xfc50ffff (0x10000) MX[B]
[5] -1 0 0xfc480600 - 0xfc4806ff (0x100) MX[B]
[6] -1 0 0xfc480400 - 0xfc4805ff (0x200) MX[B]
[7] -1 0 0x50000000 - 0x500003ff (0x400) MX[B]
[8] -1 0 0xfc480000 - 0xfc4803ff (0x400) MX[B]
[9] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
[10] -1 0 0xfc400000 - 0xfc47ffff (0x80000) MX[B](B)
[11] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0 0x00001400 - 0x0000143f (0x40) IX[B]
[15] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]
[16] -1 0 0x0000fc00 - 0x0000fc1f (0x20) IX[B]
[17] -1 0 0x000014d0 - 0x000014df (0x10) IX[B]
[18] -1 0 0x00001814 - 0x00001817 (0x4) IX[B]
[19] -1 0 0x00001800 - 0x00001807 (0x8) IX[B]
[20] -1 0 0x00001810 - 0x00001813 (0x4) IX[B]
[21] -1 0 0x000014f8 - 0x000014ff (0x8) IX[B]
[22] -1 0 0x000014c0 - 0x000014cf (0x10) IX[B]
[23] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
[24] -1 0 0x00000170 - 0x00000177 (0x8) IX[B]
[25] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
[26] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[27] -1 0 0x00001480 - 0x0000149f (0x20) IX[B]
[28] -1 0 0x00001460 - 0x0000147f (0x20) IX[B]
[29] -1 0 0x00001440 - 0x0000145f (0x20) IX[B]
[30] -1 0 0x000014e0 - 0x000014e7 (0x8) IX[B](B)
(II)"extmod" will be loaded. This was enabled by default and also specified in the config file.
(II)"dbe" will be loaded. This was enabled by default and also specified in the config file.
(II)"glx" will be loaded. This was enabled by default and also specified in the config file.
(II)"freetype" will be loaded. This was enabled by default and also specified in the config file.
(II)"record" will be loaded by default.
(II)"dri" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule:"dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule:"dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule:"extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule:"freetype"
(II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.0.90, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule:"glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule:"type1"
(WW) Warning, couldn't open module type1
(II) UnloadModule:"type1"
(EE) Failed to load module"type1" (module does not exist, 0)
(II) LoadModule:"v4l"
(II) Loading /usr/lib/xorg/modules/drivers//v4l_drv.so
(II) Module v4l: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 0.1.1
ABI class: X.Org Video Driver, version 2.0
(II) LoadModule:"vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.1.0
ABI class: X.Org Video Driver, version 2.0
(II) LoadModule:"record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule:"intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 2.2.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 2.0
(II) LoadModule:"kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule:"mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) v4l driver for Video4Linux
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
965GM, 965GME/GLE, G33, Q35, Q33, Intel Integrated Graphics Device
(II) Primary Device is: PCI 00:02:0
(--) Assigning device section with no busID to primary device
(--) Chipset 865G found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xfc500000 - 0xfc50ffff (0x10000) MX[B]
[5] -1 0 0xfc480600 - 0xfc4806ff (0x100) MX[B]
[6] -1 0 0xfc480400 - 0xfc4805ff (0x200) MX[B]
[7] -1 0 0x50000000 - 0x500003ff (0x400) MX[B]
[8] -1 0 0xfc480000 - 0xfc4803ff (0x400) MX[B]
[9] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
[10] -1 0 0xfc400000 - 0xfc47ffff (0x80000) MX[B](B)
[11] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0 0x00001400 - 0x0000143f (0x40) IX[B]
[15] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]
[16] -1 0 0x0000fc00 - 0x0000fc1f (0x20) IX[B]
[17] -1 0 0x000014d0 - 0x000014df (0x10) IX[B]
[18] -1 0 0x00001814 - 0x00001817 (0x4) IX[B]
[19] -1 0 0x00001800 - 0x00001807 (0x8) IX[B]
[20] -1 0 0x00001810 - 0x00001813 (0x4) IX[B]
[21] -1 0 0x000014f8 - 0x000014ff (0x8) IX[B]
[22] -1 0 0x000014c0 - 0x000014cf (0x10) IX[B]
[23] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
[24] -1 0 0x00000170 - 0x00000177 (0x8) IX[B]
[25] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
[26] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[27] -1 0 0x00001480 - 0x0000149f (0x20) IX[B]
[28] -1 0 0x00001460 - 0x0000147f (0x20) IX[B]
[29] -1 0 0x00001440 - 0x0000145f (0x20) IX[B]
[30] -1 0 0x000014e0 - 0x000014e7 (0x8) IX[B](B)
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xfc500000 - 0xfc50ffff (0x10000) MX[B]
[5] -1 0 0xfc480600 - 0xfc4806ff (0x100) MX[B]
[6] -1 0 0xfc480400 - 0xfc4805ff (0x200) MX[B]
[7] -1 0 0x50000000 - 0x500003ff (0x400) MX[B]
[8] -1 0 0xfc480000 - 0xfc4803ff (0x400) MX[B]
[9] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
[10] -1 0 0xfc400000 - 0xfc47ffff (0x80000) MX[B](B)
[11] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
[12] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[13] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[14] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0 0x00001400 - 0x0000143f (0x40) IX[B]
[18] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]
[19] -1 0 0x0000fc00 - 0x0000fc1f (0x20) IX[B]
[20] -1 0 0x000014d0 - 0x000014df (0x10) IX[B]
[21] -1 0 0x00001814 - 0x00001817 (0x4) IX[B]
[22] -1 0 0x00001800 - 0x00001807 (0x8) IX[B]
[23] -1 0 0x00001810 - 0x00001813 (0x4) IX[B]
[24] -1 0 0x000014f8 - 0x000014ff (0x8) IX[B]
[25] -1 0 0x000014c0 - 0x000014cf (0x10) IX[B]
[26] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
[27] -1 0 0x00000170 - 0x00000177 (0x8) IX[B]
[28] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
[29] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[30] -1 0 0x00001480 - 0x0000149f (0x20) IX[B]
[31] -1 0 0x00001460 - 0x0000147f (0x20) IX[B]
[32] -1 0 0x00001440 - 0x0000145f (0x20) IX[B]
[33] -1 0 0x000014e0 - 0x000014e7 (0x8) IX[B](B)
[34] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[35] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module"int10"
(II) LoadModule:"int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module"vbe"
(II) LoadModule:"vbe"
(II) Reloading /usr/lib/xorg/modules//libvbe.so
(II) Loading sub module"vgahw"
(II) LoadModule:"vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 0.1.0
ABI class: X.Org Video Driver, version 2.0
(**) intel(0): Depth 16, (--) framebuffer bpp 16
(==) intel(0): RGB weight 565
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 865G
(--) intel(0): Chipset:"865G"
(--) intel(0): Linear framebuffer at 0xF0000000
(--) intel(0): IO registers at addr 0xFC400000
(II) intel(0): 1 display pipe available.
(==) intel(0): Using EXA for acceleration
(II) Loading sub module"ddc"
(II) LoadModule:"ddc"(II) Module"ddc" already built-in
(II) Loading sub module"i2c"
(II) LoadModule:"i2c"(II) Module"i2c" already built-in
(II) intel(0): Output VGA using monitor section Monitor0
(II) intel(0): I2C bus"CRTDDC_A" initialized.
(II) intel(0): I2C bus"DVODDC_D" initialized.
(II) Loading sub module"sil164"
(II) LoadModule:"sil164"
(II) Loading /usr/lib/xorg/modules/drivers//sil164.so
(II) Module sil164: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) intel(0): I2C bus"DVOI2C_E" initialized.
(II) Loading sub module"ch7xxx"
(II) LoadModule:"ch7xxx"
(II) Loading /usr/lib/xorg/modules/drivers//ch7xxx.so
(II) Module ch7xxx: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) intel(0): I2C bus"DVOI2C_E" removed.
(II) intel(0): I2C bus"DVOI2C_E" initialized.
(II) Loading sub module"ivch"
(II) LoadModule:"ivch"
(II) Loading /usr/lib/xorg/modules/drivers//ivch.so
(II) Module ivch: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) intel(0): I2C bus"DVOI2C_E" removed.
(II) intel(0): I2C bus"DVOI2C_B" initialized.
(II) Loading sub module"tfp410"
(II) LoadModule:"tfp410"
(II) Loading /usr/lib/xorg/modules/drivers//tfp410.so
(II) Module tfp410: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) intel(0): I2C bus"DVOI2C_B" removed.
(II) intel(0): I2C bus"DVOI2C_E" initialized.
(II) Loading sub module"ch7017"
(II) LoadModule:"ch7017"
(II) Loading /usr/lib/xorg/modules/drivers//ch7017.so
(II) Module ch7017: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) intel(0): I2C bus"DVOI2C_E" removed.
(II) intel(0): I2C bus"DVOI2C_E" initialized.
(II) intel(0): I2C bus"DVOI2C_E" removed.
(II) intel(0): I2C bus"DVODDC_D" removed.
(II) intel(0): I2C device"CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor"NEC", prod id 18310
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline"1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline"800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline"800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline"640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline"640x480"x0.0 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline"640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline"640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline"720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline"1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline"1024x768"x0.0 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
(II) intel(0): Modeline"1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline"1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline"832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline"800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline"800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline"640x480"x84.6 35.00 640 664 728 816 480 483 487 507 -hsync +vsync (42.9 kHz)
(II) intel(0): Modeline"800x600"x84.9 56.75 800 848 928 1056 600 603 607 633 -hsync +vsync (53.7 kHz)
(II) intel(0): Modeline"1280x1024"x59.9 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync (63.7 kHz)
(II) intel(0): Modeline"1280x960"x59.9 101.25 1280 1360 1488 1696 960 963 967 996 -hsync +vsync (59.7 kHz)
(II) intel(0): EDID vendor"NEC", prod id 18310
(II) intel(0): Output VGA connected
(II) intel(0): Output VGA using initial mode 1280x1024
(II) intel(0): detected 128 kB GTT.
(II) intel(0): detected 8060 kB stolen memory.
(==) intel(0): video overlay key set to 0x83e
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(++) intel(0): DPI set to (96, 96)
(II) Loading sub module"fb"
(II) LoadModule:"fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module"exa"
(II) LoadModule:"exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 2.2.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module"ramdac"
(II) LoadModule:"ramdac"(II) Module"ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xfc400000 - 0xfc47ffff (0x80000) MS[B]
[1] 0 0 0xf0000000 - 0xf7ffffff (0x8000000) MS[B]
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[6] -1 0 0xfc500000 - 0xfc50ffff (0x10000) MX[B]
[7] -1 0 0xfc480600 - 0xfc4806ff (0x100) MX[B]
[8] -1 0 0xfc480400 - 0xfc4805ff (0x200) MX[B]
[9] -1 0 0x50000000 - 0x500003ff (0x400) MX[B]
[10] -1 0 0xfc480000 - 0xfc4803ff (0x400) MX[B]
[11] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
[12] -1 0 0xfc400000 - 0xfc47ffff (0x80000) MX[B](B)
[13] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
[14] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[15] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[16] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[17] 0 0 0x000014e0 - 0x000014e7 (0x8) IS[B]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[19] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[20] -1 0 0x00001400 - 0x0000143f (0x40) IX[B]
[21] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]
[22] -1 0 0x0000fc00 - 0x0000fc1f (0x20) IX[B]
[23] -1 0 0x000014d0 - 0x000014df (0x10) IX[B]
[24] -1 0 0x00001814 - 0x00001817 (0x4) IX[B]
[25] -1 0 0x00001800 - 0x00001807 (0x8) IX[B]
[26] -1 0 0x00001810 - 0x00001813 (0x4) IX[B]
[27] -1 0 0x000014f8 - 0x000014ff (0x8) IX[B]
[28] -1 0 0x000014c0 - 0x000014cf (0x10) IX[B]
[29] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
[30] -1 0 0x00000170 - 0x00000177 (0x8) IX[B]
[31] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
[32] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[33] -1 0 0x00001480 - 0x0000149f (0x20) IX[B]
[34] -1 0 0x00001460 - 0x0000147f (0x20) IX[B]
[35] -1 0 0x00001440 - 0x0000145f (0x20) IX[B]
[36] -1 0 0x000014e0 - 0x000014e7 (0x8) IX[B](B)
[37] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[38] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) intel(0): Kernel reported 238848 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 955388 kB available
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] loaded kernel module for"i915" driver.
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer mapped by ddx driver
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(==) intel(0): VideoRam: 131072 KB
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Success.
(II) intel(0): Increasing the scanline pitch to allow tiling mode (1280 -> 2048).
(II) intel(0): [drm] Registers = 0xfc400000
(II) intel(0): [drm] ring buffer = 0xf0000000
(II) intel(0): [drm] mapped front buffer at 0xf0800000, handle = 0xf0800000
(II) intel(0): [drm] mapped back buffer at 0xf2000000, handle = 0xf2000000
(II) intel(0): [drm] mapped depth buffer at 0xf2800000, handle = 0xf2800000
(II) intel(0): [drm] mapped classic textures at 0xf3000000, handle = 0xf3000000
(II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
(II) intel(0): [dri] visual configs initialized
(II) intel(0): Page Flipping disabled
(==) intel(0): Write-combining range (0xf0000000,0x8000000)
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) EXA(0): Offscreen pixmap area of 15728640 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): [DRI] installation complete
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x007df000 (pgoffset 2015)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x00800000 (pgoffset 2048)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x01000000 (pgoffset 4096)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x02000000 (pgoffset 8192)
(II) intel(0): xf86BindGARTMemory: bind key 4 at 0x02800000 (pgoffset 10240)
(II) intel(0): xf86BindGARTMemory: bind key 5 at 0x03000000 (pgoffset 12288)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x00024fff: HW cursors (20 kB)
(II) intel(0): 0x00025000-0x0002cfff: logical 3D context (32 kB)
(II) intel(0): 0x007df000: end of stolen memory
(II) intel(0): 0x007df000-0x007dffff: overlay registers (4 kB, 0x000000003718f000 physical
)
(II) intel(0): 0x00800000-0x00ffffff: front buffer (5120 kB) X tiled
(II) intel(0): 0x01000000-0x01efffff: exa offscreen (15360 kB)
(II) intel(0): 0x02000000-0x027fffff: back buffer (5120 kB) X tiled
(II) intel(0): 0x02800000-0x02ffffff: depth buffer (5120 kB) X tiled
(II) intel(0): 0x03000000-0x04ffffff: classic textures (32768 kB)
(II) intel(0): 0x08000000: end of aperture
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Output VGA is connected to pipe A
(II) intel(0): [drm] dma control initialized, using IRQ 18
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(**) Option"dpms""true"
(**) intel(0): DPMS enabled
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: Enabled
(WW) intel(0): Option"UseInternalAGPGART" is not used
(WW) intel(0): Option"XAANoOffscreenPixmaps" is not used
(WW) intel(0): Option"DmaMode" is not used
(WW) intel(0): Option"CursorShadow" is not used
(WW) intel(0): Option"CursorShadowAlpha" is not used
(WW) intel(0): Option"CursorShadowYOffset" is not used
(WW) intel(0): Option"CursorShadowXOffset" is not used
(WW) intel(0): Option"FlatPanelProperties" is not used
(WW) intel(0): Option"NoLogo" is not used
(WW) intel(0): Option"UseEDID" is not used
(WW) intel(0): Option"AddARGBGLXVisuals" is not used
(WW) intel(0): Option"RenderAccel" is not used
(WW) intel(0): Option"TwinView" is not used
(WW) intel(0): Option"SecondMonitorVendorName" is not used
(WW) intel(0): Option"SecondMonitorModelName" is not used
(WW) intel(0): Option"SecondMonitorHorizSync" is not used
(WW) intel(0): Option"SecondMonitorVertRefresh" is not used
(WW) intel(0): Option"TwinViewOrientation" is not used
(WW) intel(0): Option"ConnectedMonitor" is not used
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(II) AIGLX: Loaded and initialized /usr/lib/dri/i915_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) intel(0): Setting screen physical size to 338 x 270
(**) Option"CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option"Protocol""standard"
(**) Keyboard0: Protocol: standard
(**) Option"AutoRepeat""500 30"
(**) Option"XkbRules""xorg"
(**) Keyboard0: XkbRules:"xorg"
(**) Option"XkbModel""pc105"
(**) Keyboard0: XkbModel:"pc105"
(**) Option"XkbLayout""uk"
(**) Keyboard0: XkbLayout:"uk"
(WW) Option"XkbOptions" requires an string value
(**) Option"CustomKeycodes""off"
(**) Keyboard0: CustomKeycodes disabled
(**) Option"Protocol""auto"
(**) PS/2 Mouse: Device:"/dev/psaux"
(**) PS/2 Mouse: Protocol:"auto"
(**) Option"CorePointer"
(**) PS/2 Mouse: always reports core events
(**) Option"Device""/dev/psaux"
(**) Option"Buttons""5"
(**) Option"Emulate3Buttons""false"
(**) Option"Emulate3Timeout""70"
(**) Option"ZAxisMapping""4 5"
(**) PS/2 Mouse: ZAxisMapping: buttons 4 and 5
(**) PS/2 Mouse: Buttons: 9
(**) PS/2 Mouse: Sensitivity: 1
(II) evaluating device (PS/2 Mouse)
(II) XINPUT: Adding extended input device"PS/2 Mouse" (type: MOUSE)
(II) evaluating device (Keyboard0)
(II) XINPUT: Adding extended input device"Keyboard0" (type: KEYBOARD)
(--) PS/2 Mouse: PnP-detected protocol:"ExplorerPS/2"
(II) PS/2 Mouse: ps2EnableDataReporting: succeeded
Could not init font path element /usr/share/fonts/X11/cyrillic, removing from list!
Could not init font path element /usr/share/fonts/X11/75dpi/:unscaled, removing from list!
Could not init font path element /usr/share/fonts/X11/Type1, removing from list!
Could not init font path element /usr/share/fonts/X11/75dpi, removing from list!
Could not init font path element /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, removing from list!
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
-
anticapitalista
Posts: 5,955
- Site Admin
- Joined: 11 Sep 2007
#7
I'm at work at the moment (skiving!)
It could be down to the video card you have. Do you have nvidia/ati?
It could be down to the video card you have. Do you have nvidia/ati?
-
DJiNNPosts: 316
- Joined: 26 Oct 2007
#8
Re: the Vid card, AFAIK it's onboard, and i think it's of the"intel" variety. It's certainly not nvidia and i don't think it's ati. I've removed xorg and tried re-installing but there are dep probs. (ie:"X depends on Y, which is not going to be installed, so xorg cannot be installed")
Phew, and it's really hot here to boot...... I'm more of a moon person than a sun person. Where's the rain when you need it? Or some snow even.... __{{emoticon}}__
LOL!! I won't tell anyone, honest! __{{emoticon}}__anticapitalista wrote:I'm at work at the moment (skiving!)
It could be down to the video card you have. Do you have nvidia/ati?
Re: the Vid card, AFAIK it's onboard, and i think it's of the"intel" variety. It's certainly not nvidia and i don't think it's ati. I've removed xorg and tried re-installing but there are dep probs. (ie:"X depends on Y, which is not going to be installed, so xorg cannot be installed")
Phew, and it's really hot here to boot...... I'm more of a moon person than a sun person. Where's the rain when you need it? Or some snow even.... __{{emoticon}}__
-
JerryPosts: 452
- Joined: 12 Sep 2007
#9
Pardon my ignorance, but what does that mean?skiving
-
DJiNNPosts: 316
- Joined: 26 Oct 2007
#10
It's English slang for"Not doing what you're supposed to be doing" LOL!! ie: being at work and doing something"Other than" the work you should be doing. __{{emoticon}}__Jerry wrote:Pardon my ignorance, but what does that mean?skiving
-
DJiNNPosts: 316
- Joined: 26 Oct 2007
#11
anti - i've bitten the bullet &"re-installed" antiX. (Sigh). In doing so, i actually think this shows one of the great strengths of not just antiX, but Linux in general. It took all of 5 mins to get it re-installed, and apart from the fact that i have to also re-install a few apps (IceDove etc) it's pretty much done. Used the same /home dir, so all the settings are already there.
Try doing that with Windows!! __{{emoticon}}__
I'm still not sure just what's causing it, but i'm going to keep a careful note of everything that i do and all the updates/upgrades in the next few days/weeks.
Try doing that with Windows!! __{{emoticon}}__
I'm still not sure just what's causing it, but i'm going to keep a careful note of everything that i do and all the updates/upgrades in the next few days/weeks.
-
eriefisherPosts: 1,520
- Joined: 07 Oct 2007
#12
I will bet it's the same issue I had with slim. The log file gets huge and won't let you start x. I had to remove /var/log/slim.log and /var/run/slim.lock to get x started. I then found it was full of acpi errors so I disabled it and no more problem.
There is another post here somewhere about it I will try to find it.
There is another post here somewhere about it I will try to find it.
-
DJiNNPosts: 316
- Joined: 26 Oct 2007
#13
If i remember i'll keep an eye on the log files over the next few weeks to see what they're up to!!
Thanks eriefisher, i never thought of that. If it happens again i'll check the log files. It's happened 3 times now!! __{{emoticon}}__eriefisher wrote:I will bet it's the same issue I had with slim. The log file gets huge and won't let you start x. I had to remove /var/log/slim.log and /var/run/slim.lock to get x started. I then found it was full of acpi errors so I disabled it and no more problem.
There is another post here somewhere about it I will try to find it.
If i remember i'll keep an eye on the log files over the next few weeks to see what they're up to!!
-
eriefisherPosts: 1,520
- Joined: 07 Oct 2007
#14
Here is the original post I was referring to:
========= SCRAPER REMOVED AN EMBEDDED LINK HERE ===========
url was:"antix.freeforu ms.org/solved-well-i-finally-broke-it-t164.html?highlight=slim.lock"
linktext was:"antix.freeforu ms.org/solved-well ... =slim.lock"
====================================
========= SCRAPER REMOVED AN EMBEDDED LINK HERE ===========
url was:"antix.freeforu ms.org/solved-well-i-finally-broke-it-t164.html?highlight=slim.lock"
linktext was:"antix.freeforu ms.org/solved-well ... =slim.lock"
====================================
-
TLeeNorrisPosts: 180
- Joined: 04 Dec 2007
#15
The msystem has an option to clear logs on apply and on reboot. Would that help clear these types of logs?