After initially disliking Qupzilla in MX14 I now love it after upgrading. Is there a way to add this in ANtix 13.2? I tried enabling backports repo but search stiill finds no Qupzilla. Do I need to add MX14 repo to Antix install Qupzilla then disable MX14 repo? I am not sure on how to do this. thank you in advance.
Duh! I think if I enable testing repo's Qup should be there then install remove testing repo's, will try that later.
topic title: Qupzilla in Wheezy? {solved} streaming HD! Whoopee!
3 posts
• Page 1 of 1
-
zarg2Posts: 71
- Joined: 16 Jul 2013
#1
Last edited by zarg2 on 24 Apr 2014, 19:59, edited 1 time in total.
-
anticapitalista
Posts: 5,955
- Site Admin
- Joined: 11 Sep 2007
#2
I would first try adding this repo.
deb
========= SCRAPER REMOVED AN EMBEDDED LINK HERE ===========
url was:"http://main.mepis-deb.org/mepiscr/xfce/"
linktext was:"http://main.mepis-deb.org/mepiscr/xfce/"
====================================
xfce-4.10 main
deb
========= SCRAPER REMOVED AN EMBEDDED LINK HERE ===========
url was:"http://main.mepis-deb.org/mepiscr/repo/"
linktext was:"http://main.mepis-deb.org/mepiscr/repo/"
====================================
mepis12cr main non-free
deb
========= SCRAPER REMOVED AN EMBEDDED LINK HERE ===========
url was:"http://main.mepis-deb.org/mepiscr/xfce/"
linktext was:"http://main.mepis-deb.org/mepiscr/xfce/"
====================================
xfce-4.10 main
deb
========= SCRAPER REMOVED AN EMBEDDED LINK HERE ===========
url was:"http://main.mepis-deb.org/mepiscr/repo/"
linktext was:"http://main.mepis-deb.org/mepiscr/repo/"
====================================
mepis12cr main non-free
-
zarg2Posts: 71
- Joined: 16 Jul 2013
#3
I went to the qupzilla site and dled the deb pkg installed with gdebi. Working in Antix 13.2 as shown below. !st attempt at YT vid=crash with no subsequent crashes. __{{emoticon}}__
this system:
$ inxi -Fxz
System: Host: oldlaptop Kernel: 3.7.10-antix.5-486-smp i686 (32 bit gcc: 4.8.1)
Desktop: IceWM 1.3.7
Distro: antiX-13.2_386-full Luddite 4 November 2013
Machine: System: Hewlett-Packard product: Presario 2100 (PF181UA) v: KAM1.59
Mobo: Hewlett-Packard model: 0024 v: PQ1A84
Bios: Phoenix v: KAM1.59 date: 04/19/2004
CPU: Single core mobile AMD Athlon XP2800+ (-UP-) cache: 512 KB clocked at 530 MHz
flags: (pae sse) bmips: 1060
Graphics: Card: Advanced Micro Devices [AMD] ATI RS100 [Radeon IGP320M]
bus-ID: 01:05.0
Display Server: X.Org 1.12.4 drivers: ati,radeon (unloaded: fbdev,vesa)
Resolution: 1024x768@60.0hz
GLX Renderer: Mesa DRI R100 (RS100 4336) x86/MMX+/3DNow!+/SSE NO-TCL DRI2
GLX Version: 1.3 Mesa 8.0.5 Direct Rendering: Yes
Audio: Card ULi M5451 PCI AC-Link Controller Audio Device
driver: snd_ali5451 port: 8400 bus-ID: 00:06.0
Sound: ALSA v: k3.7.10-antix.5-486-smp
Network: Card-1: Broadcom BCM4306 802.11b/g Wireless LAN Controller
driver: b43-pci-bridge bus-ID: 00:09.0
IF: N/A state: N/A mac: N/A
Card-2: National DP83815 (MacPhyter) Ethernet Controller
driver: natsemi port: 8c00 bus-ID: 00:12.0
IF: eth0 state: down mac: <filter>
Card-3: Ralink RT2870/RT3070 Wireless Adapter
driver: rt2800usb v: 2.3.0 usb-ID: 001-002
IF: wlan0 state: up mac: <filter>
Drives: HDD Total Size: 40.0GB (13.3% used)
ID-1: /dev/sda model: ST9402112A size: 40.0GB
Partition: ID-1: / size: 35G used: 5.0G (16%) fs: ext4 dev: /dev/sda1
ID-2: swap-1 size: 2.18GB used: 0.00GB (0%) fs: swap dev: /dev/sda2
Sensors: System Temperatures: cpu: 52.0C mobo: N/A
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 83 Uptime: 1:38 Memory: 109.7/436.2MB
Init: SysVinit runlevel: 5 Gcc sys: 4.7.2
Client: Shell (bash 4.2.371) inxi: 2.1.18
this system:
$ inxi -Fxz
System: Host: oldlaptop Kernel: 3.7.10-antix.5-486-smp i686 (32 bit gcc: 4.8.1)
Desktop: IceWM 1.3.7
Distro: antiX-13.2_386-full Luddite 4 November 2013
Machine: System: Hewlett-Packard product: Presario 2100 (PF181UA) v: KAM1.59
Mobo: Hewlett-Packard model: 0024 v: PQ1A84
Bios: Phoenix v: KAM1.59 date: 04/19/2004
CPU: Single core mobile AMD Athlon XP2800+ (-UP-) cache: 512 KB clocked at 530 MHz
flags: (pae sse) bmips: 1060
Graphics: Card: Advanced Micro Devices [AMD] ATI RS100 [Radeon IGP320M]
bus-ID: 01:05.0
Display Server: X.Org 1.12.4 drivers: ati,radeon (unloaded: fbdev,vesa)
Resolution: 1024x768@60.0hz
GLX Renderer: Mesa DRI R100 (RS100 4336) x86/MMX+/3DNow!+/SSE NO-TCL DRI2
GLX Version: 1.3 Mesa 8.0.5 Direct Rendering: Yes
Audio: Card ULi M5451 PCI AC-Link Controller Audio Device
driver: snd_ali5451 port: 8400 bus-ID: 00:06.0
Sound: ALSA v: k3.7.10-antix.5-486-smp
Network: Card-1: Broadcom BCM4306 802.11b/g Wireless LAN Controller
driver: b43-pci-bridge bus-ID: 00:09.0
IF: N/A state: N/A mac: N/A
Card-2: National DP83815 (MacPhyter) Ethernet Controller
driver: natsemi port: 8c00 bus-ID: 00:12.0
IF: eth0 state: down mac: <filter>
Card-3: Ralink RT2870/RT3070 Wireless Adapter
driver: rt2800usb v: 2.3.0 usb-ID: 001-002
IF: wlan0 state: up mac: <filter>
Drives: HDD Total Size: 40.0GB (13.3% used)
ID-1: /dev/sda model: ST9402112A size: 40.0GB
Partition: ID-1: / size: 35G used: 5.0G (16%) fs: ext4 dev: /dev/sda1
ID-2: swap-1 size: 2.18GB used: 0.00GB (0%) fs: swap dev: /dev/sda2
Sensors: System Temperatures: cpu: 52.0C mobo: N/A
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 83 Uptime: 1:38 Memory: 109.7/436.2MB
Init: SysVinit runlevel: 5 Gcc sys: 4.7.2
Client: Shell (bash 4.2.371) inxi: 2.1.18