Howto Install Huawei Modem E1550 in antiX 11 ?

Posts: 2
AstroPhysik
Joined: 16 Jun 2012
#1
Hello,

how can i install Huawei Modem E1550 in antiX 11 ? lsusb lists it as :
Huawei Technoligoes Co, Ltd. E620 USB Modem.

Tho Modem is not listed in the ADSL/ppoe Application? Which application will be needed?
I have no Internet Connection on this PC. Can maybe ubuntu packets be installed? Or which are the packet-sources for antiX?

thanx AP.
Posts: 2
AstroPhysik
Joined: 16 Jun 2012
#2
OK i have found umts-panel. I've set the modem instructions there. All seems ok, but the baudrate (9600)
Where can the connection be established?

(EDITED)
On Application/Internet/GPRS-EDGE-UMTS-Panel i put the modem configuration.
The AccessData are put in correct:

Code: Select all

PIN=mypin...
Username=data@bob.at
PAssword=ppp
Phone=*99#
APN=bob.at

Modem:
Modem=/dev/ttyUSB0
Baud = 100000
Init1 = ATZ
Init2= ATQ0 V1 E1 S0=0 & C1 &D2 +FCLASS=0
At the terminal with umts-panel the status is listening an give the settings above back, but it does not connect.


regards AP.