topic title: Hello from new user
Posts: 3
chevyiron420
Joined: 01 May 2016
#1
I have just started out with Antix16 on this old computer project. It is a Jetway 623dmp motherboard with pentium 3 coppermine @ 1Ghz, with 2 Gbyte ram. So far its working pretty good, other than the cpu runs at 100% wile watching dvd's and youtube causes iceweasel to shut off. Smplayer works good.
Phil
Posts: 521
Shay
Joined: 20 Apr 2015
#2
Please post
$inxi -Fxz
read out please.
Posts: 3
chevyiron420
Joined: 01 May 2016
#3
Let me see if this works.

Code: Select all

t@antix1:/home/philip# inxi -Fxz
System:    Host: antix1 Kernel: 4.4.8-antix.1-486-smp i686 (32 bit gcc: 4.9.3)
           Desktop: IceWM 1.3.8
           Distro: antiX-16-b2.1_386-full Berta Cáceres 26 April 2016
Machine:   No /sys/class/dmi; using dmidecode: no smbios data available. Old system?
CPU:       Single core Pentium III (Coppermine) (-UP-) cache: 256 KB
           flags: (pae sse) bmips: 1997 speed: 998 MHz (max)
Graphics:  Card: VIA VT8623 [Apollo CLE266] integrated CastleRock graphics
           bus-ID: 01:00.0
           Display Server: X.org 1.16.4 driver: vesa
           tty size: 80x28 Advanced Data: N/A for root
Audio:     Card VIA VT8233/A/8235/8237 AC97 Audio Controller
           driver: snd_via82xx port: e400 bus-ID: 00:11.5
           Sound: Advanced Linux Sound Architecture v: k4.4.8-antix.1-486-smp
Network:   Card: Realtek RTL-8100/8101L/8139 PCI Fast Ethernet Adapter
           driver: 8139too v: 0.9.28 port: d000 bus-ID: 00:0d.0
           IF: eth0 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives:    HDD Total Size: 10.1GB (40.7% used)
           ID-1: /dev/sda model: IC35L010AVER07 size: 10.1GB
Partition: ID-1: / size: 8.2G used: 2.9G (38%) fs: ext4 dev: /dev/sda2
           ID-2: swap-1 size: 1.11GB used: 0.00GB (0%) fs: swap dev: /dev/sda1
Sensors:   System Temperatures: cpu: No active sensors found. Have you configured your sensors yet? mobo: N/A
Info:      Processes: 124 Uptime: 23:53 Memory: 258.2/1985.4MB
           Init: SysVinit runlevel: 5 Gcc sys: 4.9.2
           Client: Shell (bash 4.3.301) inxi: 2.3.0
Posts: 4,164
rokytnji
Joined: 20 Feb 2009
#4
Howdy and Welcome. Just for future reference. There is no need to run inxi as root in terminal unless you wish to include dmicode in your inxi readout.

Here is a example of a dmicode inxi readout. Don't tell me. I already know I procrastinate a bunch this year.
My schedule is full as heck lately.

Code: Select all

biker@biker:~
$ sudo -s
[sudo] password for biker: 
Sorry, try again.
[sudo] password for biker: 
root@biker:/home/biker# inxi -zv7
System:    Host: biker Kernel: 4.2.1-antix.2-486-smp i686 (32 bit gcc: 4.9.2)
           Desktop: IceWM 1.3.8 dm: slim
           Distro: antiX-14-a3-RV_386-full Killah P 11 October 2014
Machine:   System: GATEWAY product: W3507 v: 500
           Mobo: Intel model: D102GGC2 v: AAD70214-201
           Bios: Intel v: GC11020M.15A.2010.2006.0817.0956 date: 08/17/2006
CPU:       Single core Intel Celeron D (-UP-) cache: 512 KB
           flags: (lm nx pae sse sse2 sse3) bmips: 6399 speed: 3199 MHz (max)
Memory:    Array-1 capacity: 2 GB devices: 2 EC: None
           Device-1: DIMM2 size: 1 GB speed: 533 MHz type: DDR2 (Synchronous)
           bus width: 64 bits
           manufacturer: 0x7F98000000000000 part: 0x4B4B553335302D454C470000000000000000 serial: 0x9A2F7177
           Device-2: DIMM3 size: 1 GB speed: 533 MHz type: DDR2 (Synchronous)
           bus width: 64 bits
           manufacturer: N/A part: 0x56303144324C463147423138383634383637 serial: N/A
Graphics:  Card: Advanced Micro Devices [AMD/ATI] RC410 [Radeon Xpress 200/1100]
           bus-ID: 01:05.0 chip-ID: 1002:5a61
           Display Server: X.org 1.16.4 drivers: ati,radeon (unloaded: fbdev,vesa)
           tty size: 80x28 Advanced Data: N/A for root
Audio:     Card Advanced Micro Devices [AMD/ATI] IXP SB4x0 High Definition Audio Controller
           driver: snd_hda_intel bus-ID: 00:14.2 chip-ID: 1002:437b
           Sound: Advanced Linux Sound Architecture v: k4.2.1-antix.2-486-smp
Network:   Card-1: Realtek RTL-8100/8101L/8139 PCI Fast Ethernet Adapter
           driver: 8139too v: 0.9.28 port: 1000
           bus-ID: 02:02.0 chip-ID: 10ec:8139
           IF: eth0 state: down mac: <filter>
           Card-2: Realtek RTL8191SU 802.11n WLAN Adapter
           driver: r8712u usb-ID: 001-002 chip-ID: 0bda:8172
           IF: wlan1 state: N/A mac: N/A
           WAN IP: <filter> IF: eth0 ip: N/A ip-v6: N/A
           IF: wlan1 ip: <filter> ip-v6: <filter>
Drives:    HDD Total Size: 444.0GB (18.1% used)
           ID-1: /dev/sda model: ST3120213A size: 120.0GB serial: 9LS1G09D
           ID-2: /dev/sdb model: Maxtor_5A320J0 size: 323.9GB serial: A82F6WDE
           Optical: /dev/sr0 model: HL-DT-ST DVD+-RW GSA-H21N
           rev: 1.00 dev-links: cdrom,cdrw,dvd,dvdrw
           Features: speed: 48x multisession: yes
           audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r state: running
Partition: ID-1: / size: 9.0G used: 8.1G (95%) fs: ext4 dev: /dev/sda1
           label: N/A uuid: 50d6af4b-c241-4639-b075-d59149dc773f
           ID-2: /home size: 31G used: 14G (49%) fs: ext4 dev: /dev/sda3
           label: N/A uuid: bab99903-8063-4e7b-a371-7e129ad3c7a2
           ID-3: /media/data2 size: 297G used: 41G (15%) fs: ext4 dev: /dev/sdb1
           label: /data2 uuid: b3b59257-818b-457d-b44a-9bc6632c050e
           ID-4: /media/data1 size: 69G used: 10G (16%) fs: ext4 dev: /dev/sda4
           label: /data1 uuid: 284c1657-3c0b-484c-ad41-a90908a993fd
           ID-5: swap-1 size: 2.17GB used: 0.00GB (0%) fs: swap dev: /dev/sda2
           label: N/A uuid: a55f5477-b77d-4e07-b34a-d0260ad85959
RAID:      No RAID data: /proc/mdstat missing-is md_mod kernel module loaded?
Unmounted: ID-1: /dev/ram0 size: 0.02G label: N/A uuid: N/A
           ID-2: /dev/ram1 size: 0.02G label: N/A uuid: N/A
           ID-3: /dev/ram2 size: 0.02G label: N/A uuid: N/A
           ID-4: /dev/ram3 size: 0.02G label: N/A uuid: N/A
           ID-5: /dev/ram4 size: 0.02G label: N/A uuid: N/A
           ID-6: /dev/ram5 size: 0.02G label: N/A uuid: N/A
           ID-7: /dev/ram6 size: 0.02G label: N/A uuid: N/A
           ID-8: /dev/ram7 size: 0.02G label: N/A uuid: N/A
           ID-9: /dev/ram8 size: 0.02G label: N/A uuid: N/A
           ID-10: /dev/ram9 size: 0.02G label: N/A uuid: N/A
           ID-11: /dev/ram10 size: 0.02G label: N/A uuid: N/A
           ID-12: /dev/ram11 size: 0.02G label: N/A uuid: N/A
           ID-13: /dev/ram12 size: 0.02G label: N/A uuid: N/A
           ID-14: /dev/ram13 size: 0.02G label: N/A uuid: N/A
           ID-15: /dev/ram14 size: 0.02G label: N/A uuid: N/A
           ID-16: /dev/ram15 size: 0.02G label: N/A uuid: N/A
Sensors:   System Temperatures: cpu: 53.9C mobo: 52.4C
           Fan Speeds (in rpm): cpu: 2286 fan-2: 1046 fan-4: 0
Info:      Processes: 111 Uptime: 54 min Memory: 325.7/1890.1MB
           Init: SysVinit v: 2.88 runlevel: 5 default: 5 Gcc sys: 4.9.2
           Client: Shell (bash 4.3.301 running in sudo) inxi: 2.2.28 
root@biker:/home/biker# exit
exit
biker@biker:~
$


The dmicode is the ram details on this box out of a dumpster.
Posts: 521
Shay
Joined: 20 Apr 2015
#5
I use the add-on You Tube All HTML5

Just in case, to update flash

Code: Select all

# update-flashplugin-nonfree --install
Posts: 3
chevyiron420
Joined: 01 May 2016
#6
Do you see anything wrong there in the readout?
Posts: 521
Shay
Joined: 20 Apr 2015
#7
chevyiron420 wrote:Do you see anything wrong there in the readout?

Code: Select all

Sensors:   System Temperatures: cpu: No active sensors found. Have you configured your sensors yet? mobo: N/A
No, I do not. Just I would not trust the temp reading to be accurate .
The read out gives us a idea of what you are dealing with equipment wise which helps us help you.