With new conki! Don't ask me how I did it though __{{emoticon}}__ (still would like the original file please)
Michel
-
Posts: 14
- Joined: 10 Aug 2012
-
Posts: 609
- Joined: 02 Jun 2008
#17
looking good michelmassoud. it goes very well with the bike.
- Posts: 14 michelmassoud
- Joined: 10 Aug 2012
#18
Thanks. I like them both a lot (my bike and Antix/Fluxbox __{{emoticon}}__ )
Michel
Michel
-
Posts: 4,164
- Joined: 20 Feb 2009
#19
That is my original .conkyrc file from my 64bit install. It should be ok for your 32bit install also.
Just change the
antix-base to whatever you are running or grab the one from / etc/skel like Anti mentioned in chat and copy over to /home and name it .conkyrcbk. You may have to rename your running conkyrc as .conkyrccurrent before copying over the skel file before renaming or it will overwrite your current configured conkyrc file. You can rename .conkyrccurrent back to .conkyrc when done and restart conky to run what your screenshot shows.
If you use mine. Name the file .conkyrcbk and put it in /home.
(still would like the original file please)
Code: Select all
# set to yes if you want Conky to be forked in the background
background yes
short_units yes
cpu_avg_samples 2
net_avg_samples 2
out_to_console no
# X font when Xft is disabled, you can pick one with program xfontsel
#font 7x12
#font 6x10
#font 7x13
font 8x12
#font 7x12
#font *mintsmild.se*
#font -*-*-*-*-*-*-34-*-*-*-*-*-*-*
#font -artwiz-snap-normal-r-normal-*-*-100-*-*-p-*-iso8859-1
# Use Xft?
use_xft yes
# Xft font when Xft is enabled
xftfont gentium:size=10
# Create own window instead of using desktop (required in nautilus, pcmanfm and rox desktops)
own_window yes
own_window_transparent yes
own_window_hints undecorated,sticky,skip_taskbar
# Text alpha when using Xft
xftalpha 0.8
#on_bottom no
# mail spool
mail_spool $MAIL
# Update interval in seconds
update_interval 1
# Use double buffering (reduces flicker, may not work for everyone)
double_buffer yes
# Minimum size of text area
minimum_size 5 5
maximum_width 200
# Draw shades?
draw_shades no
# Draw outlines?
draw_outline no
# Draw borders around text
draw_borders no
# Stippled borders?
stippled_borders 0
# border margins
#border_margin 10
# border width
border_width 2
# Default colors and also border colors
default_color DarkSlateGrey
default_shade_color white
default_outline_color white
color3 cyan
# Text alignment, other possible values are commented
#alignment top_left
alignment top_right
#alignment bottom_left
#alignment bottom_right
# Gap between borders of screen and text
gap_x 20
gap_y 10
# Add spaces to keep things from moving about? This only affects certain objects.
use_spacer right
# Subtract file system buffers from used memory?
no_buffers yes
# set to yes if you want all text to be in uppercase
uppercase no
# boinc (seti) dir
# seti_dir /opt/seti
# Possible variables to be used:
#
# Variable Arguments Description
# acpiacadapter ACPI ac adapter state.
# acpifan ACPI fan state
# acpitemp ACPI temperature.
# adt746xcpu CPU temperature from therm_adt746x
# adt746xfan Fan speed from therm_adt746x
# battery (num) Remaining capasity in ACPI or APM
# battery. ACPI battery number can be
# given as argument (default is BAT0).
# buffers Amount of memory buffered
# cached Amount of memory cached
# color (color) Change drawing color to color
# cpu CPU usage in percents
# cpubar (height) Bar that shows CPU usage, height is
# bar's height in pixels
# downspeed net Download speed in kilobytes
# downspeedf net Download speed in kilobytes with one
# decimal
# exec shell command Executes a shell command and displays
# the output in torsmo. warning: this
# takes a lot more resources than other
# variables. I'd recommend coding wanted
# behaviour in C and posting a patch :-).
# execi interval, shell Same as exec but with specific interval.
# command Interval can't be less than
# update_interval in configuration.
# fs_bar (height), (fs) Bar that shows how much space is used on
# a file system. height is the height in
# pixels. fs is any file on that file
# system.
# fs_free (fs) Free space on a file system available
# for users.
# fs_free_perc (fs) Free percentage of space on a file
# system available for users.
# fs_size (fs) File system size
# fs_used (fs) File system used space
# hr (height) Horizontal line, height is the height in
# pixels
# i2c (dev), type, n I2C sensor from sysfs (Linux 2.6). dev
# may be omitted if you have only one I2C
# device. type is either in (or vol)
# meaning voltage, fan meaning fan or temp
# meaning temperature. n is number of the
# sensor. See /sys/bus/i2c/devices/ on
# your local computer.
# kernel Kernel version
# loadavg (1), (2), (3) System load average, 1 is for past 1
# minute, 2 for past 5 minutes and 3 for
# past 15 minutes.
# machine Machine, i686 for example
# mails Mail count in mail spool. You can use
# program like fetchmail to get mails from
# some server using your favourite
# protocol. See also new_mails.
# mem Amount of memory in use
# membar (height) Bar that shows amount of memory in use
# memmax Total amount of memory
# memperc Percentage of memory in use
# new_mails Unread mail count in mail spool.
# nodename Hostname
# outlinecolor (color) Change outline color
# pre_exec shell command Executes a shell command one time before
# torsmo displays anything and puts output
# as text.
# processes Total processes (sleeping and running)
# running_processes Running processes (not sleeping),
# requires Linux 2.6
# shadecolor (color) Change shading color
# stippled_hr (space), Stippled (dashed) horizontal line
# (height)
# swapbar (height) Bar that shows amount of swap in use
# swap Amount of swap in use
# swapmax Total amount of swap
# swapperc Percentage of swap in use
# sysname System name, Linux for example
# time (format) Local time, see man strftime to get more
# information about format
# totaldown net Total download, overflows at 4 GB on
# Linux with 32-bit arch and there doesn't
# seem to be a way to know how many times
# it has already done that before torsmo
# has started.
# totalup net Total upload, this one too, may overflow
# updates Number of updates (for debugging)
# upspeed net Upload speed in kilobytes
# upspeedf net Upload speed in kilobytes with one
# decimal
# uptime Uptime
# uptime_short Uptime in a shorter format
#
# seti_prog Seti@home current progress
# seti_progbar (height) Seti@home current progress bar
# seti_credit Seti@hoome total user credit
## antiX additives examples. Add below Text##
##Battery examples##
##${color}battery: ${color}$acpiacadapter, ${battery_percent BAT1}%
##${color}battery:${color} ${battery}
#${color}ACPI Battery: ${color}$battery
#${battery_bar 11,0}
##Wireless example##
#${color}Wireless:
#${color}essid: ${wireless_essid wlan0}
#${color}IP:${color} ${addr wlan0}
#${color}speed: ${color} ${wireless_bitrate wlan0}
#${color}link strength: ${color} ${wireless_link_bar 7,50 wlan0}
# stuff after 'TEXT' will be formatted on screen
TEXT
${color}antiX-base
${color}Desktop: ${color}${exec cat ~/.wallpaper/session}
${color}$sysname $kernel
${color}Uptime: $uptime
${color}${time %a %d %b %k:%M}
${color}Monitors:
${color}cpu: ${color}${cpu}%
${color}ram : ${color}$mem${color}/${color}$memmax ${color}- ${color}$memperc%
${color}swap: ${color}$swap${color}/${color}$swapmax ${color}- ${color}$swapperc%
${color}processes: ${color}$processes ${color}running: ${color}$running_processes
${color}Space:
${color}Root:${color} ${fs_free /} ${color}= ${fs_free_perc /}%
${color3}${execi 10 persist-enabled}
Just change the
Code: Select all
TEXT
${color}antiX-base
antix-base to whatever you are running or grab the one from / etc/skel like Anti mentioned in chat and copy over to /home and name it .conkyrcbk. You may have to rename your running conkyrc as .conkyrccurrent before copying over the skel file before renaming or it will overwrite your current configured conkyrc file. You can rename .conkyrccurrent back to .conkyrc when done and restart conky to run what your screenshot shows.
If you use mine. Name the file .conkyrcbk and put it in /home.
-
Posts: 14
- Joined: 10 Aug 2012
#20
Thanks a lot.
Michel
Michel