antiX custom install

mizpa · posted: 2012-02-20 02:54

I used the tute from a blog
========= SCRAPER REMOVED AN EMBEDDED LINK HERE ===========
url was:"http://brian-masinick.blogspot.com/2011/10/creating-your-very-own-antix-core.html?spref=tw"
linktext was:"here"
====================================
to install aand build a custom antiX, now it's just the way I like it. I've got XFCE and fluxbox, along with almost everything else he put in there, although I don't see anything comical, opaque, or crystal about the same cursors that are in the full version of antiX. Now there's not too much excess baggage or apps that will be unusable, and its based on testing rather than sid. I just have a couple of questions.
1. I know nothing about the Trinity KDE, is it something that I should uncomment in the sources? Do I need it for anything?
2. I'm planning to slim it down even further, so how do I get rid of all of the different 'locales' that are of no use to me, I only speak American English. Do I have to go to some file and get the names and then 'apt-get remove' or 'apt-get purge' to rid myself of them or can that be done by editing a file with nano?

dark-D · posted: 2012-02-20 03:12

1. trinity kde isn't included in debian, but have a look at this
========= SCRAPER REMOVED AN EMBEDDED LINK HERE ===========
url was:"http://www.trinitydesktop.org/installation.php#debian"
linktext was:"http://www.trinitydesktop.org/installation.php#debian"
====================================

2. as for removing stuff, here are some tips from me. post18498.html#p18498

male · posted: 2012-02-20 09:19

Remove unnecessary language files is also comfortable with

Code: Select all

dpkg-reconfigure locales

mizpa · posted: 2012-02-25 00:50

I now have antiX on both partitions, that may change - I had no end of grief when I dist-upgraded using apt-get so I reinstalled rather than slim down the install. This time I have slimmed it down as I built it, and dist-upgraded using smxi. That allowed me to remove all the extra locales, plus to get rid of a lot of other 'cruft' and orphans. No grief so far!

Thanks!

mizpa · posted: 2012-02-28 02:35

NOW I got grief __{{emoticon}}__ __{{emoticon}}__ __{{emoticon}}__

When I log in, I get a XFCE box that asks if I want to keep the same session or start a new one. If I click on the same, it does nothing. If I click on a new one, it demands a name __{{emoticon}}__ Why can't it just log in as usual? I've also lost my log out possiblilties. I have to use a terminal to log out now - what's up __{{emoticon}}__ I've never had this kind of problem with antiX before. and this is happenng on both installs, antiX-base and antiX-core (beefed up). Did XFCE all of a sudden go down the tubes? I've dist-upgraded both of them with smxi to prevent any problems, but it seems that I'm gonna get problems anyways!

I'm wondering if I should just reinstall or download the login manager again. What login manager comes default with antiX base and core? Isn't it slim?

Should I consider installing gdm or something else?

tradetaxfree · posted: 2012-02-28 14:20

SLIM is the default login manager with Antix. You could try purging xfce4 & then reinstalling it:

Code: Select all

apt-get remove --purge xfce4

Then run apt-get update & see if you have any messages for packages that are no longer required (due to purging xfce4) & purge these packages too & then reinstall xfce4.

Alternatively instructions
========= SCRAPER REMOVED AN EMBEDDED LINK HERE ===========
url was:"http://crunchbanglinux.org/forums/post/189346/#p189346"
linktext was:"here"
====================================
to setup LightDM with autologin (it's much lighter than GDM).

mizpa · posted: 2012-02-28 19:38

@tradetaxfree

I installed LightDM, everything seemed to go good, but at the end, I got this:

Code: Select all

Processing triggers for initramfs-tools ...
update-initramfs: Generating /boot/initrd.img-2.6.36-1-mepis
W: Possible missing firmware /lib/firmware/tigon/tg3_tso5.bin for module tg3
W: Possible missing firmware /lib/firmware/tigon/tg3_tso.bin for module tg3
W: Possible missing firmware /lib/firmware/tigon/tg3.bin for module tg3

I have no idea what this stuff means __{{emoticon}}__ __{{emoticon}}__

PLUS; when I removed and purged XFCE4, I got this response:

Code: Select all

Package xfce4 is not installed, so not removed

and yet I go through an xfce session every time I start up the computer __{{emoticon}}__ __{{emoticon}}__

I have found yet another oddity; Yesterday, I downloaded another distro and PC-BSD, just to put them on USB drives to play around with them- I downloaded on my antiX-base install, and it is showing up in my antiX-base AND on my antiX-core install __{{emoticon}}__ If everything I download on one is going to be on the other, that means that the core install is puffing up the base install and vicey-versy. Maybe it's not a good idea to have two antiX installs? I'm wondering how the downloads can cross between two separate partitions, I wiped the whole hard drive and then re-partitioned prior to installing these two antiX installs, but I've never heard of downloads 'leaking' from one partition to another. Any comments?

tradetaxfree · posted: 2012-02-28 19:49

Code: Select all

apt-get update
apt-get install firmware-linux-nonfree
update-initramfs -u -k all

mizpa · posted: 2012-02-28 20:49

Code: Select all

# apt-get install firmware-linux-nonfree
Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following NEW packages will be installed:
  firmware-linux-nonfree
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 140 kB of archives.
After this operation, 385 kB of additional disk space will be used.
Get:1 http://www.mirrorservice.org/sites/ftp.mepis.org/mepis/ mepis-11.0/main firmware-linux-nonfree all 0.28-1mepis1 [140 kB]
Fetched 140 kB in 7s (17.6 kB/s)                 
(Reading database ... 82356 files and directories currently installed.)
Unpacking firmware-linux-nonfree (from .../firmware-linux-nonfree_0.28-1mepis1_all.deb) ...
Setting up firmware-linux-nonfree (0.28-1mepis1) ...
update-initramfs: deferring update (trigger activated)
Processing triggers for initramfs-tools ...
update-initramfs: Generating /boot/initrd.img-2.6.36-1-mepis
W: Possible missing firmware /lib/firmware/tigon/tg3_tso5.bin for module tg3
W: Possible missing firmware /lib/firmware/tigon/tg3_tso.bin for module tg3
W: Possible missing firmware /lib/firmware/tigon/tg3.bin for module tg3
root@mizpa# update-initramfs -u -k all
update-initramfs: Generating /boot/initrd.img-2.6.36-1-mepis
W: Possible missing firmware /lib/firmware/tigon/tg3_tso5.bin for module tg3
W: Possible missing firmware /lib/firmware/tigon/tg3_tso.bin for module tg3
W: Possible missing firmware /lib/firmware/tigon/tg3.bin for module tg3

Looks like something's not working right !

tradetaxfree · posted: 2012-02-28 21:07

Your Antix-Base & Full seem to both be sharing the same home partition. This always causes problems with settings.

You can ignore the firmware errors now you have the non free drivers installed. If you look in /lib/firmware/tigon you will see the files are there

mizpa · posted: 2012-03-01 17:57

I don't understand why my responses to this here thread are somehow disappearing, but to try saying it all again;

I have now dumped the antiX-core and replaced it with a different Debian-clone distro so the two don't get entangled again.

I did install LightDM to the antiX-core (which downloaded/installed on both antiX partitions without having to apt-get but on the antiX-core only), but it made no difference to logging in or out - same-o, same-o __{{emoticon}}__ __{{emoticon}}__

BTW, the two antiX installs were on totally different partitions - no common /home partition was set up! I've not heard that a download can bleed/leak over from one partition to another __{{emoticon}}__

I am currently in the process of either reinstalling the antiX-base or replacing it with an antiX-full in that partition, but that's in a new thread.

Thanks for all the help!